Related papers: Using split-ring resonators to measure the electro…
A method is proposed to experimentally determine the effective complex permeability of split-ring resonator (SRR) arrays used in the design of metamaterials at microwave frequencies. We analyze the microwave response of a loop-gap resonator…
We present a theoretical and experimental study of superconducting ring resonators as an initial step toward their implementation in superconducting electronics and quantum technologies, with promising applications including superconducting…
We have developed a low temperature, high-resolution microwave surface impedance probe that is able to operate in high static magnetic fields. Surface impedance is measured by cavity perturbation of dielectric resonators, with sufficient…
We have measured the relative permeability of split-ring resonator (SRR) arrays used in metamaterials designed to have $\mu^\prime< 0$ over a narrow range of microwave frequencies. The SRR arrays were loaded into the bore of a loop-gap…
We describe and demonstrate the use of a novel toroidal split-ring resonator to make accurate and precise measurements of the permittivity of liquids and gases. We first analytically show how the resonance frequency and quality factor of…
Superconducting resonators with high quality factors are extremely sensitive detectors of the complex impedance of materials and devices coupled to them. This capability has been used to measure losses in multiple different materials and,…
Micro and nanomechanical resonators with ultra-low dissipation have great potential as useful quantum resources. The superfluid micromechanical resonators presented here possess several advantageous characteristics: straightforward…
We describe a unified classical approach for analyzing the scattering coefficients of superconducting microwave resonators with a variety of geometries. To fill the gap between experiment and theory, we also consider the influences of small…
Resonant (elastic) soft x-ray scattering (RSXS) offers a unique element, site, and valence specific probe to study spatial modulations of charge, spin, and orbital degrees of freedom in solids on the nanoscopic length scale. It cannot only…
We demonstrate an experimental method to separately test the optical response of a single sub-wavelength nano-structure to tailored electric and magnetic field distributions in the optical domain. For this purpose a highly focused…
Microwave reflectance probed photoconductivity (or $\mu$-PCD) measurement represents a contactless and non-invasive method to characterize impurity content in semiconductors. Major drawbacks of the method include a difficult separation of…
The design and performance of an electron spin resonance spectrometer operating at 3 and 9 GHz microwave frequencies combined with a 9 T superconducting magnet is described. The probehead contains a compact two-loop, one gap resonator and…
This work studies high-temperature superconducting spiral resonators as a viable candidate for realization of RF/microwave metamaterial atoms. The theory of superconducting spiral resonators will be discussed in detail, including the…
It is shown that in a rotating compressible fluid the resonant frequencies (measured in a system of reference rotating together with the medium) for the azimuthally running acoustic waves are split into two components. The received results…
We report the development of a continuous-wave and pulsed X-band electron spin resonance (ESR) spectrometer for the study of spins on ordered surfaces down to cryogenic temperatures. The spectrometer operates in ultra-high vacuum and…
For a complementary split-ring resonators (CSRRs) etched on one screen of two infinite and perfectly conducting plates under cylindrical plane wave illumination, the transmission coefficients analysis were performed through…
Quantum computers are close to become a practical technology. Solid-state implementations based, for example, on superconducting devices strongly rely on the quality of the constituent materials. In this work, we fabricate and characterize…
A split-ring resonator is a prototype of meta-atom in metamaterials. Though noble metal-based split-ring resonators have been extensively studied, up to date, there is no experimental demonstration of split-ring resonators made from…
Superconducting microwave resonators are reliable circuits widely used for detection and as test devices for material research. A reliable determination of their external and internal quality factors is crucial for many modern applications,…
We introduce a new concept of split-ball resonator and demonstrate a strong magnetic dipole response for both gold and silver spherical plasmonic nanoparticles with nanometer-scale cuts. Tunability of the magnetic dipole resonance…