Related papers: Tilt estimator for 3D non-rigid pendulum based on …
Most of the advanced control systems use sensor-based feedback for robust control. Tilt angle estimation is key feedback for many robotics and mechatronics applications in order to stabilize a system. Tilt angle cannot be directly measured…
In this work we solve the position-aided 3D navigation problem using a nonlinear estimation scheme. More precisely, we propose a nonlinear observer to estimate the full state of the vehicle (position, velocity, orientation and gyro bias)…
In this paper, we focus on motion estimation dedicated for non-holonomic ground robots, by probabilistically fusing measurements from the wheel odometer and exteroceptive sensors. For ground robots, the wheel odometer is widely used in pose…
In this paper, we propose a method for online estimation of the robot's posture. Our method uses von Mises and Bingham distributions as probability distributions of joint angles and 3D orientation, which are used in directional statistics.…
Knowledge of how a body is oriented relative to the world is frequently invaluable information in the field of robotics. An attitude estimator that fuses 3-axis gyroscope, accelerometer and magnetometer data into a quaternion orientation…
To build commercial robots, skid-steering mechanical design is of increased popularity due to its manufacturing simplicity and unique mechanism. However, these also cause significant challenges on software and algorithm design, especially…
A 3D pendulum consists of a rigid body, supported at a fixed pivot, with three rotational degrees of freedom. The pendulum is acted on by a gravitational force. Symmetry assumptions are shown to lead to the planar 1D pendulum and to the…
Two nonlinear observers for velocity-aided attitude estimation, relying on gyrometers, accelerometers, magnetometers, and velocity measured in the body-fixed frame, are proposed. As opposed to state-of-the-art body-fixed velocity-aided…
This paper introduces a new approach to 3-D position estimation from acceleration data, i.e., a 3-D motion tracking system having a small size and low-cost magnetic and inertial measurement unit (MIMU) composed by both a digital compass and…
Accurate and robust attitude estimation is a central challenge for autonomous vehicles operating in GNSS-denied or highly dynamic environments. In such cases, Inertial Measurement Units (IMUs) alone are insufficient for reliable tilt…
Inertial measurement unit (IMU)-based 3-DoF angle estimation methods for lower limb joints have been studied for decades, however the calibration motions and/or careful sensor placement are still necessary due to challenges of real-time…
In this paper, we present a novel rolling, jumping robot. The robot consists of a driven pendulum mounted to a wheel in a compact, lightweight, 3D printed design. We show that by driving the pendulum to shift the robot's weight…
This paper deals with the problem of full state estimation for vehicles navigating in a three dimensional space. We assume that the vehicle is equipped with an Inertial Measurement Unit (IMU) providing body-frame measurements of the angular…
This work presents approaches for the estimation of quantities important for the control of the momentum of a humanoid robot. In contrast to previous approaches which use simplified models such as the Linear Inverted Pendulum Model, we…
This work presents methods for the determination of a humanoid robot's joint velocities and accelerations directly from link-mounted Inertial Measurement Units (IMUs) each containing a three-axis gyroscope and a three-axis accelerometer. No…
Information about the vehicle sideslip angle is crucial for the successful implementation of advanced stability control systems. In production vehicles, sideslip angle is difficult to measure within the desired accuracy level because of…
Model-based controllers using a linearized model around the system's equilibrium point is a common approach in the control of a wheeled humanoid due to their less computational load and ease of stability analysis. However, controlling a…
This paper considers the problem of nonlinear attitude estimation for a rigid body system using intermittent and multi-rate inertial vector measurements as well as continuous (high-rate) angular velocity measurements. Two types of hybrid…
The rigid-body attitude tracking using vector and biased gyro measurements with unknown inertia matrix is studied in this note. First, a gyro-bias observer with global exponential stability is designed. Then, an attitude tracking controller…
A global navigation satellite system (GNSS) is a sensor that can acquire 3D position and velocity in an earth-fixed coordinate system and is widely used for outdoor position estimation of robots and vehicles. Various GNSS/inertial…