Related papers: Substrate induced proximity effect in superconduct…
The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the…
Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and…
Superconducting and normal state properties of sputtered Niobium nanofilms have been systematically investigated, as a function of film thickness in a d=9-90 nm range, on different substrates. The width of the superconducting-to-normal…
Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used…
Porous silicon, obtained by electrochemical etching, has been used as a substrate for the growth of nanoperforated Nb thin films. The films, deposited by UHV magnetron sputtering on the porous Si substrates, inherited their structure made…
Niobium is a practical material platform for superconducting microwave circuits; however, device-level performance can vary significantly depending on film growth and processing conditions. We compare three epitaxial Nb films grown on…
We use room temperature ion beam assisted sputtering (IBAS) to deposit niobium nitride thin films. Electrical and structural characterizations were performed by electric transport and magnetization measurements at variable temperatures,…
The present study delves into exploring the impact of a thin protective layer of scandium nitride (ScN) on the superconductive properties of thin films of niobium nitride (NbN) generated through reactive magnetron deposition. This is the…
Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system…
In recent years, it has been pointed out that the maximum accelerating gradient of a superconducting RF cavity can be increased by coating the inner surface of the cavity with a multilayer thin-film structure consisting of alternating…
Superconducting Nb3Sn films can be synthesized by controlling the atomic concentration of Sn. Multilayer sequential sputtering of Nb and Sn thin films followed by high temperature annealing is considered as a method to fabricate Nb3Sn…
In the current paper, electrical transport properties of 25 nm thick Nb films sputtered on the photosensitive semiconductor BiOCl were investigated in the temperature range 7.5 K $\leq T \leq$ 8.5 K. The influence of green (532 nm) and red…
Nb3Sn films were fabricated by multilayer sequential sputtering on Nb at substrate temperatures ranging from room temperature to 250 {\deg}C. The multilayers were then annealed inside a separate vacuum furnace at 950 {\deg}C for 3h. The…
Originally developed technique based on generation of plasma-cluster flux emitted from cathode spots at surface of an integrally cold cathode has been applied for deposition of niobium superconductive (thick) film materials. Possibility for…
Superconducting single quantum logic integrated circuits traditionally exploit magnetron sputtered niobium thin films on silicon oxide substrates. The sputtering depends on multiple process parameters, which dramatically affect mechanical,…
Superconductivity in granular films is controlled by the grain size and the inter-grain coupling. In a two-component granular system formed by a random mixture of a normal metal (N) and a superconductor (S), the superconducting nano-grains…
We examined the proximity effect in granular films made of Pb, a superconductor, and Ni, a ferromagnet, with various compositions. Slow decay of the critical temperature as a function of the relative volume concentration of Ni per sample…
We report on a combined structural and electronic analysis of niobium ultrathin films (from 2 to 10 nm) deposited in ultra-high vacuum on atomically flat R-plane sapphire wafers. A textured polycrystalline morphology is observed for the…
Interfacing bulk conducting topological Bi$_2$Se$_3$ films with s-wave superconductors initiates strong superconducting order in the nontrivial surface states. However, bulk insulating topological (Bi$_{1-x}$Sb$_{x})_2$Te$_3$ films on bulk…
Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through…