Related papers: Three-dimensional in situ characterization of phas…
Deformation heterogeneities within microstructures of polycrystalline shape memory alloys (SMAs) during superelastic stressing are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high…
A novel complex-phase steel alloy is conceived with a deliberately unstable austenite, $\gamma$, phase that enables the deformation-induced martensitic transformations (DIMT) to be explored at low levels of plastic strain. The DIMT was thus…
The reverse martensitic ("austenitic") transformation upon heating of equiatomic nickel-titanium nanoparticles with diameters between 4 and 17 nm is analyzed by means of molecular-dynamics simulations with a semi-empirical model potential.…
Thermomechanical Controlled Processing (TMCP) is widely used to control the microstructure and properties of linepipe or high strength low alloy steels (HSLA). These steels are often joined by welding and used in demanding environments such…
We investigated the adsorption of iodine on silver (111) in ultra-high vacuum. Using low-temperature scanning tunneling microscopy (LT-STM) measurements we catalog the complex surface structures on the local scale. We identified three…
Partitioning at phase boundaries of complex steels is important for their properties. We present atom probe tomography results across martensite / austenite interfaces in a precipitation-hardened maraging TRIP steel (12.2 Mn, 1.9 Ni, 0.6…
Although the principal physical behaviour of a material is inherently connected to its fundamental crystal structure, the behaviours observed in the real-world are often driven by the microstructure, which for many polycrystalline…
An original thermodynamically consistent large strains-based multiphase phase-field (PF) approach of Ginzburg-Landau type is developed for studying the grain boundary (GB)-induced martensitic transformations (MTs) in polycrystalline…
Grain boundary wetting as a preliminary stage for zinc induced grain boundary weakening and embrittlement in a Zn coated press hardened 20MnB8 steel was analyzed by means of electron backscatter diffraction, Auger electron spectroscopy,…
Segregation to grain boundaries affects their cohesion, corrosion and embrittlement and plays a critical role in heterogeneous nucleation. In order to quantitatively study segregation and phase separation at grain boundaries, we derive a…
Grain growth is a key process in the thermomechanical treatment of metals. Recently, the presence of local residual stresses within fully recrystallized grains has attracted increasing interest in connection with shear-coupled grain…
The mechanism of the evolution of the deformed microstructure at the earliest stage of annealing where the existence of the lowest length scale substructure paves the way to the formation of the so-called subgrains, has been studied for the…
Numerous full-field numerical methods exist concerning the digital description of polycrystalline materials and the modeling of their evolution during thermomechanical treatments. However, these strategies are globally dedicated to the…
Grain boundaries in ultrafine grained (UFG) materials processed by severe plastic deformation (SPD) are often called "non-equilibrium" grain boundaries. Such boundaries are characterized by excess grain boundary energy, presence of long…
At two-thirds the weight of aluminum, magnesium alloys have the potential to significantly reduce the fuel consumption of transportation vehicles. These advancements depend on our ability to optimize the desirable versus undesirable effects…
We apply the phase field crystal model to study the structure and energy of symmetric tilt grain boundaries of bcc iron in 3D. The parameters for the model are obtained by using a recently developed eight-order fitting scheme [A. Jaatinen…
Grain boundaries (GBs) in oxide perovskites significantly influence their functional properties. This study examines the atomic-scale structure and composition of a faceted asymmetric grain boundary in strontium titanate (SrTiO$_3$) using…
The physical properties of polycrystalline materials depend on their microstructure, which is the nano-to-centimeter-scale arrangement of phases and defects in their interior. Such microstructure depends on the shape, crystallographic phase…
We report a computational discovery of novel grain boundary structures and multiple grain boundary phases in elemental bcc tungsten. While grain boundary structures created by the \gamma-surface method as a union of two perfect half…
The induction hardening behavior of a new, hot-rolled 0.4 wt.% carbon steel with the two different starting microstructures of upper and lower bainite has been simulated using a Gleeble 3800. The effect of heating rate in the range 1 - 500…