Related papers: Coded Energy-Efficient Beam-Alignment for Millimet…
Hybrid analog/digital beamforming is a promising technique to realize millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems cost-effectively. However, existing hybrid beamforming designs mainly rely on real-time…
Beamforming technique realized by the multiple-input-multiple-output (MIMO) antenna arrays has been widely used to compensate for the severe path loss in the millimeter wave (mmWave) bands. In 5G NR system, the beam sweeping and beam…
Large antenna arrays can be used to generate highly focused beams that support very high data rates and reduced energy consumption. However, optimal beam focusing requires large amount of feedback from the users in order to choose the best…
Codebook-based beam selection is one approach for configuring millimeter wave communication links. The overhead required to reconfigure the transmit and receive beam pair, though, increases in highly dynamic vehicular communication systems.…
Ultra-reliable and low-latency connectivity is required for real-time and latency-sensitive applications, like wireless augmented and virtual reality streaming. Millimeter-wave (mmW) networks have enabled extremely high data rates through…
Beam training is one of the most important and challenging tasks in millimeter-wave and sub-terahertz communications. Novel transceiver architectures and signal processing techniques are required to avoid prohibitive training overhead when…
The use of the millimeter (mm) wave spectrum for next generation (5G) mobile communication has gained significant attention recently. The small carrier wavelengths at mmwave frequencies enable synthesis of compact antenna arrays, providing…
Enabling highly-mobile millimeter wave (mmWave) and terahertz (THz) wireless communication applications requires overcoming the critical challenges associated with the large antenna arrays deployed at these systems. In particular, adjusting…
An active-sensing-based learning algorithm is proposed to solve the near-field beam alignment problem with the aid of wavenumber-domain transform matrices (WTMs). Specifically, WTMs can transform the antenna-domain channel into a sparse…
Exploiting the millimeter wave (mmWave) band has recently attracted considerable attention as a potential solution to widespread deployment of device-to-device (D2D) communication challenges, namely, spectrum scarcity and interference.…
Beamforming for mmWave communications is well-studied in the PHY based on the channel parameters to develop optimum receiver processing techniques. However, even before signal processing, antenna structure and radiation parameters affect…
Beamforming techniques utilized either at the transmitter or the receiver terminals have achieved superior quality-of-service performances from both the multi-antenna wireless communications systems, communications intelligence and radar…
In millimeter wave (mmWave) systems, antenna architecture limitations make it difficult to apply conventional fully digital precoding techniques but call for low cost analog radio-frequency (RF) and digital baseband hybrid precoding…
In this paper, adaptive hybrid beamforming methods are proposed for millimeter-wave range massive multiple-input-multiple-output (MIMO) systems considering single carrier wideband transmission in uplink data mode. A statistical analog…
This paper studies energy-efficient coordinated beamforming in multi-cell multi-user multigroup multicast multiple-input single-output systems. We aim at maximizing the network energy efficiency by taking into account the fact that some of…
Millimeter-wave (mm-Wave) cellular systems are a promising option for a very high data rate communication because of the large bandwidth available at mm-Wave frequencies. Due to the large path-loss exponent in the mm-Wave range of the…
Millimeter-wave (mmWave) communication operated in frequency bands between 30 and 300 GHz has attracted extensive attention due to the potential ability of offering orders of magnitude greater bandwidths combined with further gains via…
One of the most critical challenges for deploying distributed learning solutions, such as federated learning (FL), in wireless networks is the limited battery capacity of mobile clients. While it is a common belief that the major energy…
Beam codebooks are a new feature of massive multiple-input multiple-output (M-MIMO) in 5G new radio (NR). Codebooks comprised of beamforming vectors are used to transmit reference signals and obtain limited channel state information (CSI)…
In millimeter wave (mmWave) communication systems, beamforming with large antenna arrays is critical to overcome high path losses. Separating all-digital beamforming into analog and digital stages can provide the large reduction in power…