Related papers: DOTIFS: fore-optics and calibration unit design
Camera calibration is a crucial step in photogrammetry and 3D vision applications. This paper introduces a novel camera calibration method using a designed collimator system. Our collimator system provides a reliable and controllable…
Differentiable optics, as an emerging paradigm that jointly optimizes optics and (optional) image processing algorithms, has made innovative optical designs possible across a broad range of applications. Many of these systems utilize…
Multifocal plane microscopy (MUM) allows three dimensional objects to be imaged in a single camera frame. Our approach uses dual orthogonal diffraction phase gratings with a quadratic distortion of the lines to apply defocus to the first…
For astronomical instruments, accurate knowledge of the optical pointing and coupling are essential to characterize the alignment and performance of (sub-)systems prior to integration and deployment. Ideally, this requires the phase…
Multifocal microscopy (MFM) offers high-speed three-dimensional imaging through the simultaneous image capture from multiple focal planes. Conventional MFM systems use a fabricated grating in the emission path for a single emission…
Microresonator-based degenerate optical parametric oscillation (DOPO) has recently been explored as a compelling platform for all-optical computing and quantum information applications, such as truly random number generation and the…
Adaptive optics can be used to mitigate the effects of atmospheric turbulence on imaging systems, but the correction is only partial, and deconvolution is often required to improve the resolution. This results in entire optical/digital…
We present the results of our work on developing fully integrated devices (photonic dicers) for reformatting multimode light to a diffraction limited pseudo-slit. These devices can be used to couple a seeing-limited telescope…
Existing light field representations, such as epipolar plane image (EPI) and sub-aperture images, do not consider the structural characteristics across the views, so they usually require additional disparity and spatial structure cues for…
[abridged] The International LOFAR Telescope is an interferometer with stations spread across Europe. With baselines of up to ~2,000 km, LOFAR has the unique capability of achieving sub-arcsecond resolution at frequencies below 200 MHz,…
We present two novel designs for a telescope suitable for massively-multiplexed spectroscopy. The first is a very wide field Cassegrain telescope optimised for fibre feeding. It provides a Field Of View (FOV) of 2.5 degrees diameter with a…
The stability of the fluorescence telescopes of the Pierre Auger Observatory is monitored with the optical relative calibration setup. Optical fibers distribute light pulses to three different diffuser groups within the optical system. The…
Optical transport represents a natural route towards fast communications, and it is currently used in large scale data transfer. The progressive miniaturization of devices for information processing calls for the microscopic tailoring of…
Gratings and holograms are patterned surfaces that tailor optical signals by diffraction. Despite their long history, variants with remarkable functionalities continue to be discovered. Further advances could exploit Fourier optics, which…
The capability of the adaptive optics to correct for the segmentation error is analyzed in terms of the residual wavefront RMS and the power spectral density of the phase. The analytical model and the end-to-end simulation give…
Segmented primary mirrors are indispensable to master the steady increase in spatial resolution. Phasing optics systems must reduce segment misalignments to guarantee the high optical quality required for astronomical science programs.…
Observations of transient objects, such as short gamma-ray bursts (GRBs) and electromagnetic counterparts of gravitational wave sources, require prompt spectroscopy. To carry out prompt spectroscopy, we developed an optical-fiber integral…
We present experimental demonstration of tilt-mirror assisted transmission structured illumination microscopy (tSIM) that offers a large field of view super resolution imaging. An assembly of custom-designed tilt-mirrors are employed as the…
A broad range of imaging and sensing technologies in the infrared require large Field-of-View (FoV) operation. To achieve this, traditional refractive systems often employ multiple elements to compensate for aberrations, which leads to…
Multi-Conjugate Adaptive Optics (MCAO) is essential for increasing the corrected Field-of-View (FoV) in astronomical imaging and potentially for free-space optical communications, particularly for small-aperture, transportable systems. We…