Related papers: Design and implementation of a micro-coil inductio…
Scanning Hall probe and local Hall magnetometry measurements have been used to investigate flux distributions in large mesoscopic superconducting disks with sizes that lie near the crossover between the bulk and mesoscopic vortex regimes.…
The quantitative nanomechanical characterization of soft materials using the nanoindentation technique requires further improvements in the performances of instruments, including their force resolution in particular. A micro-machined…
Fully reconfigurable metasurfaces would enable new classes of optical devices that provide unprecedented control of electromagnetic beamforms. The principal challenge for achieving reconfigurability is the need to generate large tunability…
We have performed transverse-field muon spin relaxation (TF-$\mu$SR) measurements on ambient-pressure-grown polycrystalline $\mathrm{LaO_{0.5}F_{0.5}BiS_{2}}$. From these measurements, no signature of magnetic order is found down to 25 mK.…
Method for determining the magnetic susceptibility in the high doped semiconductors is considered. A procedure that is based on double integration of the positive part of the derivative of the absorption line having a Dyson shape and takes…
Exact analytic solutions are presented for the magnetic moment and screening currents in the Meissner state of superconductor strips with rectangular cross section in a perpendicular magnetic field and/or with transport current. The…
We present a (nongyrotropic) metasurface magnetless specular isolator. This device reflects as a mirror a wave incident under a specified angle in one direction and absorbs it in the opposite direction. The metasurface is synthesized in…
We introduce a contactless technique for probing superconductivity, metal-insulator transitions, and magnetic ordering in micron-sized samples under extreme pressure. Utilizing a multistage Lenz lens system, directly sputtered onto diamond…
The magnetization of a planar heterostructure of periodically alternating type-II superconductor and soft-magnet strips exposed to a transverse external magnetic field is studied. An integral equation governing the sheet current…
Magnetic field imaging is a valuable resource for signal source localization and characterization. This work reports an optically pumped magnetometer (OPM) based on the free-induction-decay (FID) protocol, that implements microfabricated…
We report the observation of the Meissner effect in a rhombohedral graphene superconductor, realized via direct imaging of the static fringe magnetic field. In our few-micron sample, the onset of superconductivity manifests as a diamagnetic…
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this…
A growing number of two-dimensional superconductors are being discovered in the family of layered van der Waals (vdW) materials. Due to small sample volume, their characterization has been largely limited to electrical transport…
A new apparatus has been developed to measure the conductivity of rock samples. The probe, which consists of multi-coil transmitters and receivers doesn't require physical contact with the samples. The measurement is based on the induction…
This paper describes a simple microwave apparatus to measure the Hall effect in semiconductor wafers. The advantage of this technique is that it does not require contacts on the sample or the use of a resonant cavity. Our method consists of…
This paper describes a new design of superconducting dipole magnet prototype by the use of tilted solenoids. The magnet prototype, which consists of four layers of superimposed tilted solenoids with operating current of 3708 A, will produce…
High quality bulk MgB2 exhibit a structure of voids and agglomeration of crystals on different length-scales. Because of this, the superconducting currents percolate between the voids in the ensuing structure. Magnetic measurements reveal…
We established a production method of a good millimeter-wave absorber by using a 3D-printed mold. The mold has a periodic pyramid shape, and an absorptive material is filled into the mold. This shape reduces the surface reflection. The…
We describe instrumentation designed to perform millimeter-wave conductivity measurements in pulsed high magnetic fields at low temperatures. The main component of this system is an entirely non-metallic microwave resonator. The resonator…
We demonstrated a scalar atomic magnetometer using a micro-fabricated Cs vapor cell. The atomic spin precession is driven by an amplitude-modulated circularly-polarized pump laser resonant on D1 transition of Cs atoms and detected by an…