Related papers: Laboratory Demonstration of an Active Optics Syste…
Recently introduced, spaceplates achieve the propagation of light for a distance greater than their thickness. In this way, they compress optical space, reducing the required distance between optical elements in an imaging system. Here we…
There are thousands of asteroids in near-Earth space and millions expected in the Main Belt. They are diverse in their physical properties and compositions. They are also time capsules of the early Solar System making them valuable for…
The Advanced Technology Large-Aperture Space Telescope (ATLAST) is a set of mission concepts for the next generation of UVOIR space observatory with a primary aperture diameter in the 8-m to 16-m range that will allow us to perform some of…
We advocate a low-cost strategy for long-duration research into the 'milligravity' environment of asteroids, comets and small moons, where surface gravity is a vector field typically less than 1/1000 the gravity of Earth. Unlike the…
Adaptive optics systems require a calibration procedure to operate, whether in closed loop or even more importantly in forward control. This calibration usually takes the form of an interaction matrix and is a measure of the response on the…
The observation of the low-energy $\gamma$-ray (0.1-30 MeV) sky has been significantly limited since the COMPTEL instrument was decommissioned aboard the Compton Gamma-ray Observer (CGRO) satellite in 2000. The exploration of $\gamma$-ray…
Mirror facets of the H.E.S.S. imaging atmospheric Cherenkov telescopes are aligned using stars imaged onto the closed lid of the PMT camera, viewed by a CCD camera. The alignment procedure works reliably and includes the automatic analysis…
The physical size of optical imaging systems is one of the greatest constraints on their use, limiting the performance and deployment of a range of systems from telescopes to mobile phone cameras. Spaceplates are nonlocal optical devices…
Accurate primary beam calibration is essential for precise brightness measurements in radio astronomy. The VLA Low-band Ionosphere and Transient Experiment (VLITE) faces challenges in calibration due to the offset Cassegrain optics used in…
3D printing allows rapid fabrication of complex objects from digital designs. One 3D-printing process, direct laser writing, polymerises a light-sensitive material by steering a focused laser beam through the shape of the object to be…
XEUS is under study by ESA as part of the Horizon 2000+ program to utilize the International Space Station (ISS) for astronomical applications. XEUS will be a long-term X-ray observatory with an initial mirror area of 6m2 at 1 keV that will…
The soiling level of heliostat mirrors in Concentrated Solar Power (CSP) fields is one of the key factors that significantly influences optical efficiency. State-of-the-art methods of monitoring heliostats soiling levels still face various…
The integration of CubeSats with Free Space Optical (FSO) links accelerates a major advancement in high-throughput, low-Earth orbit communication systems. However, CubeSats face challenges such as size, weight, and power (SWaP) limitations,…
A robust pose estimation algorithm based on an extended Kalman filter using measurements from accelerometers, rate gyroscopes, monocular vision and ultra-wideband radar is presented. The sensor fusion and pose estimation algorithm…
The Large Binocular Telescope (LBT) has two 8.4-m primary mirrors that produce beams that can be combined coherently in a "Fizeau" interferometric mode. In principle, the Fizeau PSF enables the probing of structure at a resolution up to…
We present two novel designs for a telescope suitable for massively-multiplexed spectroscopy. The first is a very wide field Cassegrain telescope optimised for fibre feeding. It provides a Field Of View (FOV) of 2.5 degrees diameter with a…
Space observatories for gravitational radiation such as LISA are equipped with dedicated on-board instrumentation capable of measuring magnetic fields with low-noise conditions at millihertz frequencies. The reason is that the core…
The imaging and spectroscopy of habitable worlds will require large-aperture space-based telescopes, to increase the collecting area and the angular resolution. These large telescopes will necessarily use segmented primaries to fit in a…
Deformable mirrors (DMs) are a critical technology to enable coronagraphic direct imaging of exoplanets with current and planned ground - and space-based telescopes as well as future mission concepts that aim to image exoplanet types…
As an in-house instrument developmental activity at ARIES, the 4Kx4K CCD Imager is designed and developed as a first-light instrument for the axial port of the 3.6m DOT. The f/9 beam of the telescope having a plate-scale of ~ 6.4 arc-sec/mm…