Related papers: A Millimeter Wave MIMO Testbed for 5G Communicatio…
Millimeter wave offers high bandwidth for air-to-air (A2A) communication. In this paper, we evaluate the rate performance of a multiuser MIMO (MU-MIMO) configuration where several aircraft communicate with a central hub. We consider a…
The millimeter wave (mmW) frequency spectrum has been explored recently for large bandwidth communication. At these frequencies, narrow directional beams are required for communication since the signal attenuation is high due to atmospheric…
This paper demonstrates the implementation and validation of a microwave testbed for directionally modulated transmission. Directional modulation enables multiple communication and/or radar signals to be transmitted in multiple directions…
Dynamic Metasurface Antennas (DMAs) are transforming reconfigurable antenna technology by enabling energy-efficient, cost-effective beamforming through programmable meta-elements, eliminating the need for traditional phase shifters and…
Millimeter wave signals with multiple transmit and receive antennas are considered as enabling technology for enhanced mobile broadband services in 5G systems. While this combination is mainly associated with achieving high data rates, it…
This paper sets up a framework for designing a massive multiple-input multiple-output (MIMO) testbed by investigating hardware (HW) and system-level requirements such as processing complexity, duplexing mode and frame structure. Taking…
With the explosive growth of mobile data demand, the fifth generation (5G) mobile network would exploit the enormous amount of spectrum in the millimeter wave (mmWave) bands to greatly increase communication capacity. There are fundamental…
A multi-beam antenna with a dual band operation in the 28 GHz and 31 GHz millimeter wave band is presented. The antenna has a gain of around 15 dBi in each of the three ports. The spatial footprint of the antenna is 166 mm x 123 mm x 34 mm.…
This paper presents LuMaMi28, a real-time 28 GHz massive multiple-input multiple-output (MIMO) testbed. In this testbed, the base station has 16 transceiver chains with a fully-digital beamforming architecture (with different pre-coding…
This paper presents the realization of a wireless Gigabit Ethernet communication system operating in the 60 GHz band. The system architecture uses a single carrier modulation. A differential encoded binary phase shift keying modulation and…
Communications at frequencies above 10 GHz (the mmWave band) are expected to play a major role for the next generation of cellular networks (5G), because of the potential multi-gigabit, ultra-low latency performance of this technology.…
This letter investigates the problem of providing gigabit wireless access with reliable communication in 5G millimeter-Wave (mmWave) massive multiple-input multiple-output (MIMO) networks. In contrast to the classical network design based…
For future networks (i.e., the fifth generation (5G) wireless networks and beyond), millimeter-wave (mmWave) communication with large available unlicensed spectrum is a promising technology that enables gigabit multimedia applications.…
Future wireless networks will extensively rely upon bandwidths centered on carrier frequencies larger than 10GHz. Indeed, recent research has shown that, despite the large path-loss, millimeter wave (mmWave) frequencies can be successfully…
5G millimeter wave (mmWave) cellular networks have been reported to deliver 1-2 Gbps downlink throughput, via speed-tests. However, these speed-tests capture only a few seconds of throughput and are not representative of sustained…
The performance of a real fifth generation base station was studied by using a reverberation chamber as a real life propagating environment. Preliminary tests were conducted in order to define 5G base station operation conditions at mm-wave…
The IMT 2020 requirements of 20 Gbps peak data rate and 1 millisecond latency present significant engineering challenges for the design of 5G cellular systems. Use of the millimeter wave (mmWave) bands above 10 GHz --- where vast quantities…
There have been active research activities worldwide in developing the next-generation 5G wireless network. The 5G network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,…
In this study, we propose a low-cost and portable millimeter-wave software-defined radio (SDR) for wireless experimentation in the 60 GHz band. The proposed SDR uses Xilinx RFSoC2x2 and Sivers EVK06002 homodyne transceiver and provides a…
Today, cellular networks have saturated frequencies below 3\,GHz. Because of increasing capacity requirements, 5th generation (5G) mobile networks target the 3.5\,GHz band (3.4 to 3.8\,GHz). Despite its expected wide usage, there is little…