Related papers: OxIOD: The Dataset for Deep Inertial Odometry
We present a robust system for state estimation that fuses measurements from multiple lidars and inertial sensors with GNSS data. To initiate the method, we use the prior GNSS pose information. We then perform incremental motion in…
Recent studies confirm the applicability of Inertial Measurement Unit (IMU)-based systems for human motion analysis. Notwithstanding, high-end IMU-based commercial solutions are yet too expensive and complex to democratize their use among a…
Accurately estimating vehicle velocity via smartphone is critical for mobile navigation and transportation. This paper introduces a cutting-edge framework for velocity estimation that incorporates temporal learning models, utilizing…
In recent years, thanks to the continuously reduced cost and weight of 3D Lidar, the applications of this type of sensor in robotics community have become increasingly popular. Despite many progresses, estimation drift and tracking loss are…
Visual inertial odometry (VIO) is a process for fusing visual and kinematic data to understand a machine's state in a navigation task. Olfactory inertial odometry (OIO) is an analog to VIO that fuses signals from gas sensors with inertial…
In this work, we propose an interoceptive-only state estimation system for a quadrotor with deep neural network processing, where the quadrotor dynamics is considered as a perceptive supplement of the inertial kinematics. To improve the…
Detecting and interpreting operator actions, engagement, and object interactions in dynamic industrial workflows remains a significant challenge in human-robot collaboration research, especially within complex, real-world environments.…
In this paper, we present a tightly coupled optimization-based GPS-Visual-Inertial odometry system to solve the trajectory drift of the visual-inertial odometry especially over long-term runs. Visual reprojection residuals, IMU residuals,…
We present visual inertial lidar legged navigation system (VILENS), an odometry system for legged robots based on factor graphs. The key novelty is the tight fusion of four different sensor modalities to achieve reliable operation when the…
Legged robots carry an IMU, but the inertial solution drifts because consumer-grade IMUs are noisy. However, the feet create intermittent contacts with the environment that can be used to mitigate that drift. This report develops a sequence…
A new event camera dataset, EVIMO2, is introduced that improves on the popular EVIMO dataset by providing more data, from better cameras, in more complex scenarios. As with its predecessor, EVIMO2 provides labels in the form of per-pixel…
We present an efficient multi-sensor odometry system for mobile platforms that jointly optimizes visual, lidar, and inertial information within a single integrated factor graph. This runs in real-time at full framerate using fixed lag…
Reliable odometry for legged robots without cameras or LiDAR remains challenging due to IMU drift and noisy joint velocity sensing. This paper presents a purely proprioceptive state estimator that uses only IMU and motor measurements to…
In this paper we present the Oxford Road Boundaries Dataset, designed for training and testing machine-learning-based road-boundary detection and inference approaches. We have hand-annotated two of the 10 km-long forays from the Oxford…
Visual-Inertial odometry (VIO) is known to suffer from drifting especially over long-term runs. In this paper, we present GVINS, a non-linear optimization based system that tightly fuses GNSS raw measurements with visual and inertial…
Inertial motion capture is a promising approach for capturing motion outside the laboratory. However, as one major drawback, most of the current methods require different quantities to be calibrated or computed offline as part of the setup…
Visible images have been widely used for motion estimation. Thermal images, in contrast, are more challenging to be used in motion estimation since they typically have lower resolution, less texture, and more noise. In this paper, a novel…
Simultaneous localization and mapping (SLAM) techniques can be used to navigate the visually impaired, but the development of robust SLAM solutions for crowded spaces is limited by the lack of realistic datasets. To address this, we…
In this work we propose a tightly-coupled Extended Kalman Filter framework for IMU-only state estimation. Strap-down IMU measurements provide relative state estimates based on IMU kinematic motion model. However the integration of…
Foot-mounted inertial sensors become popular in many indoor or GPS-denied applications, including but not limited to medical monitoring, gait analysis, soldier and first responder positioning. However, the foot-mounted inertial navigation…