Related papers: Twinning-induced pseudoelastic behavior in (MoW)$_…
Phase diagrams supported by density functional theory methods can be crucial for designing high-entropy alloys that are subset of multi-principal$-$element alloys. We present phase and property analysis of quinary…
The cyclic deformation behavior of extruded Mg-8.5wt.%Al alloy with a conventional extrusion texture and a modified texture is systematically investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent (EVPSC)…
Metastable alloys, such as $\beta$-phase titanium (Ti) alloys with a body-centered cubic (BCC) lattice, can exhibit exceptional mechanical properties through the interplay of multiple deformation mechanisms -- diffusionless phase…
In situ straining experiments were performed in a TEM on an equimolar CoCrFeMnNi (Cantor) high entropy alloy at room and cryogenic temperature. Perfect and partial dislocation activity were recorded in both cases. Twinning directly follows…
The influence of the physical mechanisms activated during deformation and annealing on the microstructure and texture evolution as well as on the mechanical properties in the equiatomic CoCrFeMnNi high-entropy alloy (HEA) were investigated.…
This work presents a pilot study on a strained complex concentrated alloy based on refractory elements: MoNbTaTiZr. Initially, the as-cast and homogenization-annealed conditions were characterized. After casting, the alloy consists of two…
Plasticity in body-centered cubic (BCC) nanocrystals is often associated with twin nucleation phenomena under extreme loading conditions. Here, we reveal unconventional twinning pathways that operate at the intersection of crystal…
We report twinning to slip transition with decreasing size and increasing temperature in ultrathin $<$100$>$ BCC Fe nanowires. Molecular dynamics simulations have been performed on different nanowire size in the range 0.404-3.634 nm at…
Body-Centred Cubic (BCC) lattices with twinned meta-crystal architecture inspired by the strengthening of bulk metals have significantly improved mechanical performance; however, their deformation behaviour and underlying strengthening…
The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…
Aiming at increasing the yield strength of transformation and twinning induced plasticity (TRIP and TWIP) titanium alloys, a dual-phase $\alpha$/$\beta$ alloy is designed and studied. The composition Ti 7Cr 1.5Sn (wt.%) is proposed, based…
Near-beta titanium alloys have shown low Young's modulus and good strength, making them excellent implant candidates. However, their processing using thermomechanical routes in single phase beta region results in heterogeneous…
We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests…
Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing…
Zirconium alloys are used in the nuclear industry as structural materials, and can be subject to high strain rate loading conditions during forming and in the case of a reactor accident. In this context, the relationship between strain rate…
There is growing interest in promoting deformation twinning for plasticity in advanced materials, as highly organized twin boundaries are beneficial to better strength-ductility combination in contrast to disordered grain boundaries.…
The deformation mechanisms governing the cyclic stress-strain behaviour of a TiNi shape memory alloy were investigated in this work. To understand the development of these mechanisms during cyclic loading, three low-cycle fatigue tests were…
A polycrystalline plasticity model, which incorporates the contribution of deformation twinning, is proposed. For this purpose, each material point is treated as a composite material consisting of a parent constituent and multiple twin…
A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950 {\deg}C, 975 {\deg}C and 1000 {\deg}C to reveal the influence of temperature and the resulting…
Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…