Related papers: High-performance InSe Transistors with Ohmic Conta…

Oxide semiconductors have emerged as common channel materials in transistors and hold promise for next-generation electronics, yet achieving high mobility typically requires costly vacuum-based techniques. Here, ultrathin (5-nm) indium…

Metal-semiconductor interface is a bottleneck for efficient transport of charge carriers through Transition Metal Dichalcogenide (TMD) based field-effect transistors (FETs). Injection of charge carriers across such interfaces is mostly…

The metal contacts on 2D black phosphorus field-effect transistor and photodetectors are studied. The metal work functions can significantly impact the Schottky barrier at the metal-semiconductor contact in black phosphorus devices. Higher…

Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of…

A finite Schottky barrier and large contact resistance between monolayer MoS2 and electrodes are the major bottlenecks in developing high-performance field-effect transistors (FETs) that hinder the study of intrinsic quantum behaviors such…

Layered two-dimensional (2D) semiconducting transition metal dichalcogenides (TMD) have been widely isolated, synthesized, and characterized recently. Numerous 2D materials are identified as the potential candidates as channel materials for…

In this article, a novel two-path model is proposed to quantitatively explain sub-threshold characteristics of back-gated Schottky barrier FETs (SB-FETs) from 2D channel materials. The model integrates the 'conventional' model for SB-FETs…

The potential barrier height at the interface formed by a metal contact and multiple one-dimensional (1D) quasi-ballistic channels in field-effect transistors (FETs) is evaluated across different carbon nanotube and nanowire device…

Although semiconductor to metal phase transformation of MoTe$_{2}$ by high-density laser irradiation of more than 0.3 MW/cm$^{2}$ has been reported, we reveal that the laser-induced-metal (LIM) phase is not the 1T' structure derived by a…

Two-dimensional (2D) semiconductors, such as the transition metal dichalcogenides, have demonstrated tremendous promise for the development of highly tunable quantum devices. Realizing this potential requires low-resistance electrical…

High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped…

We report the fabrication of back-gated field-effect transistors (FETs) using ultra-thin, mechanically exfoliated MoSe2 flakes. The MoSe2 FETs are n-type and possess a high gate modulation, with On/Off ratios larger than 106. The devices…

Ferroelectric field-effect transistors employ a ferroelectric material as a gate insulator, the polarization state of which can be detected using the channel conductance of the device. As a result, the devices are of potential to use in…

Making a metal contact to the two-dimensional semiconductor MoS2 without creating a Schottky barrier is a challenge. Using density functional calculations we show that, although the Schottky barrier for electrons obeys the Schottky-Mott…

We report the realization of field-effect transistors (FETs) made with chemically- synthesized layered two dimensional (2D) crystal semiconductor WS2. The 2D Schottky-barrier FETs demonstrate ambipolar behavior and a high (~105x) on/off…

We report electrical spin injection from a ferromagnetic metal contact into a semiconductor light emitting diode structure with an injection efficiency of 30% which persists to room temperature. The Schottky barrier formed at the Fe/AlGaAs…

Atomically thin two-dimensional (2D) materials are promising candidates for sub-10 nm transistor channels due to their ultrathin body thickness, which results in strong electrostatic gate control. Properly scaling a transistor technology…

Rhodium (Rh) is found similar to Palladium (Pd) in making near-ohmic electrical contacts to single-walled carbon nanotubes (SWNTs) with diameters d > ~ 1.6 nm. Non-negligible positive Schottky barriers (SBs) exist between Rh or Pd and…

In ultra-thin two-dimensional (2-D) materials, the formation of ohmic contacts with top metallic layers is a challenging task that involves different processes than in bulk-like structures. Besides the Schottky barrier height, the transfer…

Atomically thin, two-dimensional (2D) indium selenide (InSe) has attracted considerable attention due to large tunability in the band gap (from 1.4 to 2.6 eV) and high carrier mobility. The intriguingly high dependence of band gap on layer…