Related papers: Modulation of near-wall turbulence in the transiti…
We investigate rough-wall turbulent flows through direct numerical simulations of flow over three-dimensional transitionally rough sinusoidal surfaces. The roughness Reynolds number is fixed at $k^+=10$, where $k$ is the sinusoidal…
A set of boundary conditions called the Transpiration-Resistance Model (TRM) are investigated in altering near-wall turbulence. The TRM has been previously proposed by \citet{Lacis2020} as a means of representing the net effect of surface…
Turbulence is omnipresent in Nature and technology, governing the transport of heat, mass, and momentum on multiple scales. For real-world applications of wall-bounded turbulence, the underlying surfaces are virtually always rough; yet…
Surface roughness significantly impacts transition to turbulence, especially over high-speed, blunt geometries where surface ablation is necessary to mitigate heat loads during atmospheric entry. Inspired by sand-grain roughness experiments…
Turbulent flows above a solid surface are characterised by a hydrodynamic roughness that represents, for the far velocity field, the typical length scale at which momentum mixing occurs close to the surface. Here, we are theoretically…
Boundary layer flow over a realistic porous wall might contain both the effects of wall-permeability and wall-roughness. These two effects are typically examined in the context of a rough-wall flow, i.e., by defining a ``roughness'' length…
Walls in discrete element method simulations of granular flows are sometimes modeled as a closely packed monolayer of fixed particles, resulting in a rough wall rather than a geometrically smooth wall. An implicit assumption is that the…
Direct Numerical Simulations (DNS) of turbulent channel flow at a shear Reynolds number of $Re_{*}=360$ for Newtonian and Herschel-Bulkley fluids in smooth and rough channels has been performed. The rough surface was made of irregular…
The influence of surface roughness on transition to turbulence in a Mach 4.5 boundary layer is studied using direct numerical simulations. Transition is initiated by the nonlinearly most dangerous inflow disturbance, which causes the…
Existing hemolysis algorithms are often constructed for laminar flows that expose red blood cells to a constant rate of shear. It remains an open question whether such models are applicable to turbulent flows, where there is a significant…
Knowledge of turbulent flows over non-flat surfaces is of major practical interest in diverse applications. Significant work continues to be reported in the roughness regime at high Reynolds numbers where the cumulative effect of surface…
We study the effect of surface texture on an overlying turbulent flow for textures made of an alternating slip/no-slip pattern, a common model for superhydrophobic surfaces, but also a particularly simple form of texture. For texture sizes…
The influence of near-wall density and viscosity gradients on near-wall turbulence in a channel are studied by means of Direct Numerical Simulation (DNS) of the low-Mach number approximation of the Navier--Stokes equations. Different…
The interaction between near-wall turbulence and wall curvature is described for the incompressible flow in a plane channel with a small concave-convex-concave bump on the bottom wall, with height comparable to the wall-normal location of…
This study explores experimentally the turbulent flow in a laboratory flume, interacting with waves propagated against the flow. It focuses a region of wave-blocking for which there is a streamwise location on the water surface, where the…
Superhydrophobic surfaces dramatically reduce skin friction of overlying liquid flows. These surfaces are complex and numerical simulations usually rely on models for reducing this complexity. One of the simplest consists in finding an…
We use interface-resolved simulations to study near-wall turbulence modulation by small inertial particles, much denser than the fluid, in dilute/semi-dilute conditions. We considered three bulk solid mass fractions, $\Psi=0.34\%$, $3.37\%$…
In the context of subaqueous ripple and dune formation, we present here a Reynolds averaged calculation of the turbulent flow over a topography. We perform a weakly non-linear expansion of the velocity field, sufficiently accurate to…
In this work, we study the flow in curved channels, an archetypal configuration that allows insights into problems featuring turbulence bounded by curved walls. Besides its relevance to many engineering applications, it exhibits a rich…
In this paper, we investigate the effect of boundary surface roughness on numerical simulations of incompressible fluid flow past a cylinder in two and three spatial dimensions furnished with slip boundary conditions. The governing…