Related papers: Excimer laser cleaning of black sulphur encrustati…
The effect of pulsed laser polishing on rough niobium surfaces was investigated. We created different well-defined roughness profiles with standard emery papers and subsequently remelted random surface areas with a size of about 2x2 mm^2…
Electronic devices are progressively fabricated on flexible substrates allowing new fields of applications. A maskless and very flexible structuring process is offered by ablation using ultra-short pulse laser irradiation. Usually, certain…
This study investigates the possibility of using a femtosecond pulse laser to remove iron ore slurry used to stabilise blast-hole structures by mining industries, intending to preserve the wall's stability and the chemical and compositional…
A femtosecond laser is a powerful tool for micromachining of silicon. In this work, large-area laser ablation of crystalline silicon is comprehensively studied using a laser source of pulse width 300 fs at two wavelengths of 343 nm and 1030…
We use a 1030 nm laser with 7 ps pulse duration and average power up to 100 W to ablate pyramid-shape subwavelength structures (SWS) on alumina and sapphire. The SWS give an effective and cryogenically robust anti-reflection coating in the…
We describe a technique for surface and sub-surface micro-machining of glass substrates using tightly focused femtosecond laser pulses at a wavelength of 1660 nm. Although silicate glass is normally transparent at this wavelength, the…
Synthesis of graphene with reduced use of chemical reagents is essential for manufacturing scale-up and to control its structure and properties. In this paper, we report on a novel chemical-free mechanism of graphene exfoliation from…
Using a modified self-consistent one-dimensional hydrodynamic lagrangian fluid code, laser ablation of solid copper by ultrashort laser pulses in vacuum was simulated to study fundamental mechanisms and to provide a guide for drilling…
During laser micro-polishing, the constant control of laser energy density is a key technology to improve the surface roughness. In this paper, a method which controls the energy density of UV(ultraviolet) pulse laser in real time with the…
Surface roughness plays a critical role in ultrashort pulse laser ablation, particularly for industrial applications using burst mode operations, multi-pulse laser processing, and the generation of laser-induced periodic surface structures.…
We describe a micro-fabrication method to create concave features with ultra-low surface roughness in silica, either on the end facets of optical fibers or on flat substrates. The machining uses a single focused CO2 laser pulse. Parameters…
A laser ablation system has been constructed and used to determine the damage threshold of stainless steel, rhodium and single-, poly- and nanocrystalline molybdenum in vacuum, at a number of wavelengths between 220 and 1064 nm using 5 ns…
In order to extend the investigation of laser-assisted cleaning of ITER-relevant first mirror materials to the picosecond regime, a commercial laser system delivering 10 picosecond pulses at 355 nm at a frequency of up to 1 MHz has been…
Selective thin-film removal is needed in many microfabrication processes such as 3-D patterning of optoelectronic devices and localized repairing of integrated circuits. Various wet or dry etching methods are available, but laser machining…
Laser-induced lift-off of functional surface layers is a key process in micro- and nano-fabrication; however, optimization criteria for maximizing the lifted-off area remain insufficiently defined. In analogy to the well-established theory…
A multiscale studying integrating ab initio quantum mechanics, classical molecular dynamics and two-temperature model, is carried out to study film thickness dependent femtosecond laser spallation and ablation. As an interval of 130.73 nm,…
High surface area graphene sheets were obtained by electrochemical exfoliation of graphite in an acid media under constant potential conditions. Filtration and centrifugation processes played an important role in order to obtain stable…
In pulsed laser deposition, thin film growth is mediated by a laser-generated plasma, whose properties are critical for controlling the film microstructure. The advent of 2D materials has renewed the interest in how this ablation plasma can…
A 30-fs, 800 nm, 1 kHz femtosecond was used to photoablate diamond across radiant energy doses of 1 - 500 kJ/cm^2, with fluences of 10 - 50 J/cm^2 and, pulse counts from 100 to 10,000. The objective was to maximise material removal while…
The hard x-ray emission in the energy range of 30-300 keV from copper plasmas produced by 100 fs, 806 nm laser pulses at intensities in the range of 10$^{15}-10^{16}$ W cm$^{-2}$ is investigated. We demonstrate that surface roughness of the…