Related papers: A 3D-printed broadband millimeter wave absorber
A fast silicon-graphene hybrid plasmonic waveguide photodetectors beyond 1.55 {\mu}m is proposed and realized by introducing an ultra-thin wide silicon-on-insulator ridge core region with a narrow metal cap. With this novel design, the…
The fabrication of functional metamaterials with extreme feature resolution finds a host of applications such as the broad area of surface/light interaction. Non-planar features of such structures can significantly enhance their performance…
This paper describes the design of a 5.5:1 bandwidth feed antenna and reflector system, intended for use in hydrogen intensity mapping experiments. The system is optimized to reduce systematic effects that can arise in these experiments…
We present an ultra broadband thin-film infrared absorber made of saw-toothed anisotropic metamaterial. Absorbtivity of higher than 95% at normal incidence is supported in a wide range of frequencies, where the full absorption width at half…
We report a high Responsivity broad band photo-detector working in the wavelength range 400 nm to 1100 nm in a horizontal array of Si microlines (line width ~1 micron) fabricated on a Silicon-on-Insulator (SOI) wafer. The array was made…
This letter presents the first experimental results of our three-dimensional (3D) millimeter-wave (mm-wave) Compressive-Reflector-Antenna (CRA) imaging system. In this prototype, the CRA is 3D-printed and coated with a metallic spray to…
We present a 3D-printing-based design to produce wire-guided liquid microfilms that can be used for versatile spectroscopic applications. We demonstrate the ability of our instrument to provide optically useful liquid microfilms with highly…
In this work, a metamaterial selective solar absorber made of nanostructured titanium gratings deposited on an ultrathin MgF2 spacer and a tungsten ground film is proposed and experimentally demonstrated. Normal absorptance of the…
In this article, we present a technology development of a superconducting qubit device 3D-integrated by flip-chip-bonding and processed following CMOS fabrication standards and contamination rules on 200 mm wafers. We present the utilized…
Broadband mid-infrared (mid-IR) spectroscopy applications could greatly benefit from today's well-developed, highly scalable silicon photonics technology; however, this platform lacks broadband transparency due to its reliance on absorptive…
A metamaterial perfect absorber consisting of a tri-layer (Al/ZnS/Al) metal-dielectric-metal system with top aluminium nano-disks is fabricated by laser-interference lithography and lift-off processing. The metamaterial absorber had peak…
Frequency band of 30 to 300 GHz, which is termed as mm wave band offers 100 times bandwidth as compared to sub 6 GHz band. In this study, we propose a novel design which acts as a near unity absorber at 258 GHz or 0.258 THz in Y…
The absorption to mass ratio of the infrared arrays is enhanced to approximately 1.33 to 7.33 times larger than the previously reported structures by incorporating two design characteristics: first, the coupling of evanescent fields in the…
The paper presents a reflectionless stripline filter with reduced dimensions having a single bandwidth over a wide frequency range. The filter consists of coupled strip lines and RLC circuits included in the diagonal ports of the coupled…
Conformal phased arrays promise shape-changing properties, multiple degrees of freedom to the scan angle, and novel applications in wearables, aerospace, defense, vehicles, and ships. However, they have suffered from two critical…
Meeting the escalating demands of data transmission and computing, driven by artificial intelligence (AI), requires not only faster optical transceivers but also advanced integration technologies that can seamlessly combine photonic and…
The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics…
Mass production of photonic integrated circuits requires high-throughput wafer-level testing. We demonstrate that optical probes equipped with 3D-printed elements allow for efficient coupling of light to etched facets of nanophotonic…
Here we apply the optical nanocircuit concepts to design and analyze in detail a three-dimensional (3-D) plasmonic nanotransmission line network that may act as a negative-refraction broadband metamaterial at infrared and optical…
We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the…