Related papers: A 3D-printed broadband millimeter wave absorber
Three-dimensional direct laser writing via two photon polymerization is used to fabricate anti-reflective structured surfaces composed of sub-wavelength conicoid features optimized to operate over a wide bandwidth in the near-infrared range…
We report on the development of transmission-line reflectionless filters operating with passbands at 100 GHz and 230 GHz, and stopband absorption up to 500 GHz, the highest operating frequencies yet recorded for such filters. The designs…
We present millimeter and sub-millimeter room temperature transmission and loss measurements of 3D printed alumina disc and of a disc with one-sided 3D printed sub-wavelength structures anti-reflection coatings (SWS-ARC). For four bands…
This article presents a fully 3D-printed wideband metasurface folded reflectarray antenna (MFRA) operating in the millimeter-wave n257 band. The proposed MFRA integrates a novel polarization-rotating reflective metasurface (RMS), a compact…
Metasurface based super absorbers exhibit near unity absorbance. While the absorption peak can be tuned by the geometry/size of the sub-wavelength resonator, broadband absorption can be obtained by placing multiple resonators of various…
Energy of propagating electromagnetic waves can be fully absorbed in a thin lossy layer, but only in a narrow frequency band, as follows from the causality principle. On the other hand, it appears that there are no fundamental limitations…
We present the design, construction and measurements of the electromagnetic performance of a wideband space beam splitter. The beam splitter is designed to power divide the incident radiation into reflected and transmitted components for…
We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the…
A microwave ultra-broadband polarization-independent metamaterial absorber is demonstrated. It is composed of a periodic array of metal-dielectric multilayered quadrangular frustum pyramids. These pyramids possess resonant absorption modes…
Millimetre-wave observations represent an important tool for Cosmology studies. The Line Intensity Mapping (LIM) technique has been proposed to map in three dimensions the specific intensity due to line (e.g. [CII], CO) emission, for…
We demonstrate that a near-field microwave microscope based on a transmission line resonator allows imaging in a substantially wide range of frequencies, so that the microscope properties approach those of a spatially-resolved impedance…
We demonstrate thin, flexible, metamaterial films with a strong, narrowband, polarization- and angle-insensitive absorption designed for wavelengths near one millimeter. These structures, fabricated by photolithography on a commercially…
We propose a thin, compact, broadband, polarization and angle insensitive metamaterial absorber based on a tungsten reflector, silicon spacer and a top pattern composed of a double square-like ring resonator utilizing nickel(Ni). In such a…
The enhanced nonlinear optical response of a one-dimensional (1D) photonic crystal (PC) made from polymers and graphene composites is observed. The graphene PC was fabricated by spin-coating. It shows obvious bandgaps at two wavelengths in…
This study introduces a graphene-assisted terahertz metamaterial absorber operating at a resonance frequency of 8.436 THz. The unit cell incorporates a graphene-based split-ring resonator (SRR) configuration with additional auxiliary splits…
This study presents the development and characterization of a novel white reflective filament suitable for additive manufacturing of finely segmented plastic scintillators using 3D printing. The filament is based on polycarbonate (PC) and…
We present the design, fabrication, and characterization of a metamaterial absorber which is resonant at terahertz frequencies. We experimentally demonstrate an absorptivity of 0.97 at 1.6 terahertz. Importantly, this free-standing absorber…
We experimentally demonstrate a broadband, fabrication tolerant, CMOS compatible compact silicon waveguide taper (34.2 um) in silicon-on-insulator wire waveguides. The taper works on multi-mode interference along the length of the taper. A…
We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar…
In this paper, we analytically design a simple configuration of a broadband THz and polarization-insensitive absorber. The mentioned absorber consists of two layers of graphene disks, and the transmission line model is considered for the…