Related papers: Visible absorbing TiO2 thin films by physical depo…
Tritium permeation into and through materials poses a critical challenge for the development of nuclear fusion reactors. Minimizing tritium permeation is essential for the safe and efficient use of available fuel supplies. In this work, we…
The effects of 200-MeV Ag^{+15} ion irradiation on the optical properties of TiO_{2} and SnO_{2} thin films prepared by using the RF magnetron sputtering technique were investigated. These films were characterized by using UV-vis…
Transparent conducting oxides (TCOs) are essential for the optoelectronics industry, but there is a critical gap in cost-effective methods to rapidly deposit low sheet resistance, high transmittance films without damaging delicate…
Vanadium dioxide is a complex oxide material, which shows large resistivity and optical reflectance change while transitioning from the insulator to metal phase at ~68 {\deg}C. In this work, we use a modified atmospheric thermal oxidation…
Strontium titanate, SrTiO3, a widely used substrate material for electronic oxide thin film devices, has provided many interesting features. In a combination with a similar oxide material, LaAlO3, it has recently received great interest. It…
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…
Absorption of light in superconducting electronics is a major limitation on the quality of circuit architectures that integrate optical components with superconducting components. A 10 nm thick film of a typical superconducting material…
A tunneling spectroscopy study is presented of superconducting MoN and Nb$_{0.8}$Ti$_{0.2}$N thin films grown by atomic layer deposition (ALD). The films exhibited a superconducting gap of 2meV and 2.4meV respectively with a corresponding…
Crystalline wurtzite zinc oxide (w-ZnO) can be used as a wide band gap semiconductor for light emitting devices and for transparent or high temperature electronics. The use of amorphous zinc oxide (a-ZnO) can be an advantage in these…
TiO$_{2-\delta}$ films were deposited on (100) Lanthanum aluminates LaAlO$_{3}$ substrates at a very low oxygen chamber pressure $P\approx 0.3$ mtorr employing a pulsed laser ablation deposition technique. In previous work, it was…
Thin films of inorganic materials as Tin-doped indium oxide, titanium oxide, Niobium doped titanium oxide, were deposited for comparison on glass and Polyethylene terephthalate (PET) substrates with a DC sputtering method. These thin films…
A limiting optical diode is an asymmetric nonlinear device that is bidirectionally transparent at low power, but becomes opaque when illuminated by sufficiently intense light incident from a particular direction. We explore the use of a…
Titanium dioxide (TiO2) is a wide band gap semiconducting material which is promising for photocatalysis. Here we present first-principles calculations to study the pressure dependence of structural and electronic properties of two TiO2…
When a slightly defective rutile TiO$_2$(110) surface is exposed to O$_2$ at elevated temperatures, the molecule dissociates at defects, filling O vacancies (\ov) and creating O adatoms (\oad) on {\tifc} rows. The adsorption of molecular…
We analyze the transparency of a thin film of low refractive index (an optical glue or a bonding layer) placed between higher-index media and forming an opto-pair. Examples include a semiconductor light-emitting diode with attached lens or…
The availability of large-area substrates imposes an important constraint on the technological and commercial realization of devices made of layered materials. Aluminum nitride films on silicon are shown to be promising candidate materials…
Recent experimental observations of laser-induced adsorption at the interface between an alkali vapor and a dielectric surface have demonstrated the possibility of growing metallic films of nanometric thickness on dielectric surfaces, with…
We propose a systematic approach to obtain various forms of insulating titanium oxynitrides Ti$_{n}$N$_{2}$O$_{2n-3}$ and we conduct a detailed study on its $n=2$ case, Ti$_{2}$N$_{2}$O. We study the energetics and the electronic structures…
We report the growth of ultrathin VO$_{2}$ films on rutile TiO$_{2}$ (001) substrates via reactive molecular-beam epitaxy. The films were formed by the cyclical deposition of amorphous vanadium and its subsequent oxidation and…
In the present work we investigate various optical properties (such as light absorption and reflectance) of anodic TiO2 nanotubes layers directly transferred as self-standing membranes onto quartz substrates. This allows investigation in a…