Related papers: Thermodynamics and kinetics of core-shell versus a…
Strengthening in age-hardenable alloys is mainly achieved through nano-scale precipitates whose formation paths from the atomic-scale, solute-enriched entities are rarely analyzed and understood in a directly-verifiable way. Here, we…
Atomistic simulations are used to study linear complexion formation at dislocations in a body-centered cubic Fe-Ni alloy. Driven by Ni segregation, precipitation of the metastable B2-FeNi and stable L10-FeNi phases occurs along the…
The present work investigates the atomic interactions among Cu, Al, and Ni elements in bcc-iron matrix, focusing on the formation mechanism of nano-sized core-shell Cu precipitates. Using a combination of atom probe tomography (APT),…
Formation of large volume fractions of Mn-Ni-Si precipitates (MNSPs) causes excess irradiation embrittlement of reactor pressure vessel (RPV) steels at high, extended-life fluences. Thus, a new and unique, semi-empirical cluster dynamics…
Precipitation hardening, which relies on a high density of intermetallic precipitates, is a commonly utilized technique for strengthening structural alloys. Structural alloys are commonly strengthened through a high density of small size…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
A multiscale approach based on the phase-field model is developed to simulate homogeneous and heterogeneous formation of {\theta}' precipitates during high temperature ageing in Al-Cu alloys. The model parameters that determine the…
The T91 grade and similar 9Cr tempered-martensitic steels (also known as ferritic-martensitic) are leading candidate structural alloys for fast fission nuclear and fusion power reactors. At low temperatures (300 to 400 $^\circ$C) neutron…
The Fe-Cu system has attracted much attention over the last several decades due to its technological importance as a model alloy for Cu steels. In spite of these efforts several aspects of its phase diagram remain unexplained. Here we use…
The crystallization of complex, concentrated alloys can result in atomic-level short-range order, composition gradients, and phase separation. These features govern the properties of the resulting alloy. While nucleation and growth in…
Two different precipitate hardening aluminium alloys processed by friction stir welding were investigated. The microstructure and the hardness of the as delivered materials were compared to that of the weld nugget. Transmission electron…
Iron based industrial steels typically contain a large number of alloying elements, even so-called low alloyed steels. Under irradiation, these alloying elements form clusters that have a detrimental impact of the mechanical properties of…
A correlative approach is employed to simultaneously assess structure and chemistry of (carbide and boride) precipitates in a set of novel Co/Ni-base superalloys. Structure is derived from electron backscatter diffraction (EBSD) with…
We characterise the influence of the segregation behaviours of two typical alloying elements, aluminium and nickel, on the interfacial cohesive properties of copper-rich precipitates in ferritic steels, with a view towards understanding…
Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys. Early stages of precipitation are particularly important from the fundamental…
Recent studies on CoNi-based multi-principal element alloys (MPEAs) have demonstrated high strength and ductility, attributed to the formation of stable L12 nanoscale precipitates. However, the fundamental mechanisms behind such impressive…
A multidisciplinary approach is presented to analyse the precipitation process in a model Al-Cu alloy. Although this topic has been extensively studied in the past, most of the investigations are focussed either on transmission electron…
Precipitation-strengthened alloys, such as Ni-base, Co-base and Fe-base superalloys, show the development of dendrite-like precipitates in the solid state during aging at near-$\gamma^{\prime}$ solvus temperatures. These features arise out…
We consider the process of precipitation in binary alloys in the presence of mechanical deformation. It is commonly observed that mechanical deformation prior to or during precipitation leads to microstructure with excess defects, which…
Nucleation and growth of Ti$_3$Al \textalpha{}$_2$ ordered domains in \textalpha{}-Ti--Al--X alloys were characterised using a combination of transmission electron microscopy, atom probe tomography and small angle X-ray scattering. Model…