Related papers: Non-invasive thermometer based on proximity superc…
We present a set of experiments to optimize the performance of the noninvasive thermometer based on proximity superconductivity. Current through a standard tunnel junction between an aluminum superconductor and a copper electrode is…
We discuss inherent thermometry in a Superconductor - Normal metal - Superconductor tunnel junction. In this configuration, the energy selectivity of single-particle tunneling can provide a significant electron cooling, depending on the…
We have successfully fabricated Cu/AlOx-Al/Nb normal-metal/insulator/superconductor tunnel junction devices with a high value of the superconducting gap (up to $\sim 1$ mV), using electron-beam lithography and angle evaporation techniques…
We propose a mesoscopic thermometer for ultrasensitive detection based on the proximity effect in superconductor-normal metal (SN) heterostructures. The device is based on the zero-bias anomaly due to the inelastic Cooper pair tunneling in…
We present a simple on-chip electronic thermometer with the potential to operate down to 1 mK. It is based on transport through a single normal-metal - superconductor tunnel junction with rapidly widening leads. The current through the…
We demonstrate both theoretically and experimentally two limiting factors in cooling electrons using biased tunnel junctions to extract heat from a normal metal into a superconductor. Firstly, when the injection rate of electrons exceeds…
A proximity-effect thermometer measures the temperature dependent critical supercurrent in a long superconductor - normal metal - superconductor (SNS) Josephson junction. Typically, the transition from the superconducting to the normal…
In mesoscopic superconductor/normal-metal/superconductor (SNS) heterostructures, it is known that the resistance of the normal metal between the superconductors has a strong temperature dependence. Based on this phenomenon, we have…
Temperature is a fundamental parameter in the study of physical phenomena. At the nanoscale, local temperature differences can be harnessed to design novel thermal nanoelectronic devices or test quantum thermodynamical concepts. Determining…
Coulomb blockade thermometers (CBTs) are versatile and, in principle, primary thermometers operating down to the micro-Kelvin range but bias heating spoils the thermometry and the primary mode. Here, we introduce a method to extract the CBT…
Hybrid normal metal - insulator - superconductor microstructures suitable for studying an interference of electrons were fabricated. The structures consist of a superconducting loop connected to a normal metal electrode through a tunnel…
We demonstrate an original method -- based on controlled oxidation -- to create high-quality tunnel junctions between superconducting Al reservoirs and InAs semiconductor nanowires. We show clean tunnel characteristics with a current…
We couple a proximity Josephson junction to a Joule-heated normal metal film and measure its electron temperature under steady state and nonequilibrium conditions. With a timed sequence of heating and temperature probing pulses, we are able…
We have successfully fabricated micron-scale Cu-AlO$_{x} $-Al-NbN normal metal-insulator-superconductor (NIS) tunnel junction devices, using pulsed laser deposition (PLD) for NbN film growth, and electron-beam lithography and shadow…
Temperature imaging of nanoscale systems is a fundamental problem which has myriad potential technological applications. For example, nanoscopic cold spots can be used for spot cooling electronic components while hot spots could be used for…
In a hybrid Superconductor - Insulator - Normal metal tunnel junction biased just below the gap, the extraction of hot electrons out of the normal metal results in electronic cooling effect. The quasiparticles injected in the superconductor…
We propose a new type of a transition edge sensor based on an Al/AlOx/Ti/AlOx/Al superconductor - insulator - superconductor - insulator - superconductor (SIS'IS) structure. It exhibits sharp dependence of zero bias resistance on…
A superconducting tunnel junction is used to directly extract quasiparticles from one of the leads of a single-Cooper-pair-transistor. The consequent reduction in quasiparticle density causes a lower rate of quasiparticle tunneling onto the…
Superconducting tunnel junctions are being developed for application as photon detectors in astronomy. We present the latest results on the development of very high quality, very low critical temperature junctions, fabricated out of pure Al…
The temperature dependence of the I-V characteristics of many single-electron tunneling devices enable thermometer operation of these systems. We investigate two normal conducting kinds of them, {\sl (a)} a single junction in a…