Related papers: Electrodeposition of Ni-P composite coatings: A re…
In the electroplating industry Ni-P coatings are extensively employed owing to their excellent properties which enable substrate protection against corrosion and wear. Depending on their composition and structure, as-plated deposits…
Coatings of ternary nanocomposite Si-C-N ceramic coatings have shown newer and improved mechanical and functional properties over the coarser and monolithic coatings. Properties like high hardness, wear resistance, oxidation resistance,…
Although electrodeposition from aqueous media has been widely used to obtain metallic deposits, there are cases where the application of non-aqueous solutions offers advantages over the traditional baths or even represents the only way to…
It has been shown previously for electrodeposited Co/Cu multilayers that the single-bath electrodeposition process can be optimized from an electrochemical point of view in order to avoid unwanted Co dissolution and incorporation of Co in…
The objective of this research was to study the influence of electroplating parameters on electrodeposit characteristics for the production of nickel (Ni) and nickel-iron (Ni-Fe) microparts by photoelectroforming. The research focused on…
In this work we use density functional theory (DFT) calculations to benchmark empirical potentials for the interaction between nickel and sp$^2$ bonded carbon nanoparticles. These potentials are then used in order to investigate how Ni…
Embedding silicon nanoparticles in an intermetallic matrix is a promising strategy to produce remarkable bulk anode materials for lithium-ion (Li-ion) batteries with low potential, high electrochemical capacity and good cycling stability.…
Silica nanoparticles have emerged as key building blocks for advanced applications in electronics, catalysis, energy storage, biomedicine, and environmental science. In this review, we focus on recent developments in both the synthesis and…
Combining chemical vapor deposition (CVD) with electrochemical polish (EP) operations is a promising route to producing performance-capable superconducting films for use in the fabrication of cost-effective components for superconducting…
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…
The surface area of electrodeposited thin films of Ni, Co, and NiCo was evaluated using electrochemical double-layer capacitance, electrochemical area measurements using the [Ru(NH$_3$)$_6$]$^{3+}$/[Ru(NH$_3$)$_6$]$^{2+}$ redox couple, and…
We develop highly corrosion-resistant and conductive Ti-Nb-O coatings for metallic components -- bipolar plates (BPPs) and porous transport layers (PTLs) -- in PEM water electrolyzers. Using reactive high-power impulse magnetron sputtering…
The measured capacitance, modulus and strength of carbon nanotube-polyaniline (CNT-PANI) composite electrodes render them promising candidates for structural energy storage devices. Here, CNT-PANI composite electrodes are manufactured with…
Polycarbonate (PC) and protective (Ti,Al)N coatings exhibit extremely different material properties, specifically crystal structure, thermal stability, elastic and plastic behavior as well as thermal expansion coefficients. These…
In recent years, there has been a renewed interest in complex coacervation, driven by concerted efforts to offer novel experimental and theoretical insights into electrostatic charge-induced association. While previous studies have…
Electropolishing has found wide application as the final surface treatment of metal products in mechanical engineering and instrumentation, medicine and reflective concentrators for PV cells. It was found that electropolishing (EP) not only…
The fabrication of functional micro- and nano-electronic devices requires the deposition of high-quality materials of different electronic material classes, such as conductors, semiconductors and insulators. To establish…
Nanostructured materials and nanocomposites have shown great promise for improving the efficiency of thermoelectric materials. Herein, Fe nanoparticles were imbedded into a CrN matrix by combining two physical vapor deposition approaches,…
The process of nickel electroforming is becoming increasingly important in the manufacture of MST products, as it has the potential to replicate complex geometries with extremely high fidelity. Electroforming of nickel uses multi-component…
Three powder samples of Ni nanochains formed of polycrystalline Ni nanoparticles with an estimated diameter of about 30 nm have been synthesized by a wet chemical method using different organic surfactants. These samples, having…