Related papers: A low-steering piezo-driven mirror
We report the results of a recent search for the lowest value of thermal noise that can be achieved in LIGO by changing the shape of mirrors, while fixing the mirror radius and maintaining a low diffractional loss. The result of this…
We devise a laser-controlled adaptive optical element which operates intracavity under high intensity radiation. This element substitutes a conventional mechanically deformable mirror and is free of critical heat-sensitive components and…
Off-axis parabolic mirrors (OAPMs) are widely used in the THz and mm-wave communities for spectroscopy and imaging applications, as a result of their broadband, low-loss operation and high numerical apertures. However, the aspherical shape…
Photoelastic modulators are optical devices with a broad range of applications. These devices typically utilize a transverse interaction mechanism between acoustic and optical waves, resulting in a fundamental trade-off between the input…
We present a simple motorised rotation mount for a half-wave plate that can be used to rapidly change the polarization of light. We use the device to switch a high power laser beam between different optical dipole traps in an ultracold atom…
Deformable Mirrors (DMs) have wide applications ranging from astronomical imaging to laser communications and vision science. However, they often require bulky multi-channel cables for delivering high power to their drive actuators. A low…
We report the design and characterization of an optical shutter based on a piezoelectric cantilever. Compared to conventional electro-magnetic shutters, the device is intrinsically low power and acoustically quiet. The cantilever position…
Optical interferometers with suspended mirrors are the archetype of all current audio-frequency gravitational-wave detectors. The radiation pressure interaction between the motion of the mirror and the circulating optical field in such…
Compact, ultra-high-speed self-bearing permanent-magnet motors enable a wide scope of applications including an increasing number of optical ones. For implementation in an optical setup the rotors have to satisfy high demands regarding…
In this paper we present a Deformable Mirror (DM) based on the continuous voltage distribution over a resistive layer. This DM can correct the low order aberrations (defocus, astigmatism, coma and spherical aberration) using three…
We present a piezoelectric transducer in thin-film lithium niobate that converts a 1.7 GHz microwave signal to a mechanical wave in a single mode of a 1 micron-wide waveguide. We measure a -12 dB conversion efficiency that is limited by…
Maintaining stable and precise alignment of a laser beam is crucial in many optical setups. In this work, we present a microcontroller-based rapid auto-alignment system that detects and corrects for drifts in a laser beam trajectory using a…
Advances in optical trapping design principles have led to tremendous progress in manipulating nanoparticles (NPs) with diverse functionalities in different environments using bulky systems. However, efficient control and manipulation of…
We have developed a calibration system based on a micro-electromechanical systems (MEMS) mirror that is capable of delivering an optical beam over a wavelength range of 180 -- 2000 nm (0.62 -- 6.89 eV) in a sub-Kelvin environment. This…
We introduce an all-optical system, termed the "lying mirror", to hide input information by transforming it into misleading, ordinary-looking patterns that effectively camouflage the underlying image data and deceive the observers. This…
Compact and low-cost devices are needed for autonomous driving to image and measure distances to objects 360-degree around. We have been developing an omnidirectional stereo camera exploiting two hyperbolic mirrors and a single set of a…
We present the conceptual design and initial development of the Hysteretic Deformable Mirror (HDM). The HDM is a completely new approach to the design and operation of deformable mirrors for wavefront correction in advanced imaging systems.…
The superconducting cavities operated at high Q level need to be precisely tuned to the RF frequency. Well tuned cavities assure the good field stability and require a minimum level of RF power to reach the operating gradient level. The…
Dynamic phase microscopy has been applied for measurements of nanometer-scale displacements of a piezoelectric scanner. This scanner, which was designed for calibration purposes for scanning probe microscopy and TEM, exhibited a linear and…
In this paper, we present the Trifo Visual Inertial Odometry (Trifo-VIO), a tightly-coupled filtering-based stereo VIO system using both points and lines. Line features help improve system robustness in challenging scenarios when point…