Related papers: Effect of baffles on pressurization and thermal st…
While the rising flux tube paradigm is an elegant theory, its basic assumptions, thin flux tubes at the bottom of the convection zone with field strengths two orders of magnitude above equipartition, remain numerically unverified at best.…
This article describes the fluid dynamics video: "Effect of bubble deformability on the vertical channel bubbly flow". The effect of bubble deformability on the flow rate of bubbly upflow in a turbulent vertical channel is examined using…
Self-rewetting fluids (SRFs), such as long-chain aqueous alcohols, are a special class of liquids with surface tension that is anomalously dependent quadratically on temperature, resulting in thermocapillary flows that differ significantly…
In high-quality solid-state systems at low temperatures, the hydrodynamic or the ballistic regimes of heat and charge transport are realized in the electron and the phonon systems. In these regimes, the thermal and the electric conductance…
We use direct numerical simulations to investigate the interaction between the temperature field of a fluid and the temperature of small particles suspended in the flow, employing both one and two-way thermal coupling, in a statistically…
In particle-laden turbulent wall flows, lift forces can influence the near-wall turbulence. This has been recently observed in particle-resolved simulations, which, however, are too expensive to be used in upscaled models. Instead,…
We perform Brownian dynamics simulations for studying the self-diffusion in two-dimensional (2D) dusty plasma liquids, in terms of both mean-square displacement and velocity autocorrelation function (VAF). Super-diffusion of charged dust…
This paper shows the CFD investigation of pressure drop and thermal performance of aluminum oxide nano fluid inside square channel inserted a cylinder with and without fin using two-phase method. The constant heat flux on outer wall and…
Direct modeling of porous materials under shock is a complex issue. We investigate such a system via the newly developed material-point method. The effects of shock strength and porosity size are the main concerns. For the same porosity,…
Froth flotation predominantly separates particles according to their differences in wettability. However, other particle properties such as size, shape or density significantly influence the separation outcome as well. Froth flotation is…
Air entrapment during mold filling critically affects porosity and overall casting quality in High Pressure Die Casting. This study assesses the feasibility of applying the vof method within OpenFOAM to simulate compressible, turbulent mold…
We investigate the stabilization mechanisms of the invasion front in two-dimensional drainage displacement in porous media by using a network simulator. We focus on the process when the front stabilizes due to the viscous forces in the…
Thermo-osmosis refers to fluid migration due to temperature gradient. The mechanistic understanding of thermo-osmosis in charged nano-porous media is still incomplete, while it is important for several environmental and energy applications,…
The viscosity of liquids under nanoconfinement remains controversial. Reports range from spontaneous solidification to no change in the viscosity at all. Here, we present thorough measurements with a small-amplitude linear atomic force…
In this article, we measure the viscous damping $G'',$ and the associated stiffness $G',$ of a liquid flow in sphere-plane geometry in a large frequency range. In this regime, the lubrication approximation is expected to dominate. We first…
The phase behavior of hydrocarbon fluids confined in porous media has been reported to deviate significantly from that in the bulk environment due to the existence of sub-10nm pores. Though experiments and simulations have measured the…
We use interface-resolved simulations to study finite-size effects in turbulent channel flow of neutrally-buoyant spheres. Two cases with particle sizes differing by a factor of 2, at the same solid volume fraction of 20% and bulk Reynolds…
We examine the effects of density stratification on magnetohydrodynamic turbulence driven by the magnetorotational instability in local simulations that adopt the shearing box approximation. Our primary result is that, even in the absence…
We study average flow properties in porous media using a two-dimensional network simulator. It models the dynamics of two-phase immiscible bulk flow where film flow can be neglected. The boundary conditions are biperiodic which provide a…
This study investigates the interfacial tension, fluid mobility, and crystallization behavior of various saline and additive-modified solutions in a microfluidic chip environment, simulating pore-scale processes during CO2 injection. The…