Related papers: Sum-Rate Performance of Millimeter Wave MIMO Share…
Sensor-aided beamforming reduces the overheads associated with beam training in millimeter-wave (mmWave) multi-input-multi-output (MIMO) communication systems. Most prior work, though, neglects the challenges associated with establishing…
Millimeter wave (mmWave) has been recognized as one of key technologies for 5G and beyond networks due to its potential to enhance channel bandwidth and network capacity. The use of mmWave for various applications including vehicular…
Configuring the antenna arrays is the main source of overhead in millimeter wave (mmWave) communication systems. In high mobility scenarios, the problem is exacerbated, as achieving the highest rates requires frequent link reconfiguration.…
Dynamic subarray achieves a compromise between sum rate and hardware complexity for millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems in which antenna elements are dynamically partitioned to radio frequency (RF)…
Millimeter-wave (mmWave) spectrum is expected to support data-intensive applications that require ultra-reliable low-latency communications (URLLC). However, mmWave links are highly sensitive to blockage, which may lead to disruptions in…
In this paper we carry out the asymptotic diversity analysis for millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems by using bit interleaved coded multiple beamforming (BICMB). First, a single-user mmWave system…
This study investigates the outage performance of an under-laying wireless-powered secondary system that reuses the primary users (PU) spectrum in a multiple-input multiple-output (MIMO) cognitive radio (CR) network. Each secondary user…
Millimeter wave (mmWave) technologies have the potential to achieve very high data rates, but suffer from intermittent connectivity. In this paper, we provision an architecture to integrate sub-6 GHz and mmWave technologies, where we…
This paper presents results on the achievable spectral efficiency and on the energy efficiency for a wireless multiple-input-multiple-output (MIMO) link operating at millimeter wave frequencies (mmWave) in a typical 5G scenario. Two…
In this paper, the problem of optimal power allocation in Cognitive Radio (CR) Multiple Input Multiple Output (MIMO) systems is treated. The focus is on providing limited feedback solutions aiming at maximizing the secondary system rate…
The spectrum scarcity at sub-6 GHz spectrum has made millimeter-wave (mmWave) frequency band a key component of the next-generation wireless networks. While mmWave spectrum offers extremely large transmission bandwidths to accommodate…
The spectrum-rich millimeter wave (mmWave) frequencies have the potential to alleviate the spectrum crunch that the wireless and cellular operators are already experiencing. However, compared with traditional wireless communication in the…
Millimetre-wave (mmWave) technology is a promising candidate for meeting the intensifying demand for ultra fast wireless connectivity, especially in high-end enterprise networks. Very narrow beam forming is mandatory to mitigate the severe…
MIMO systems in the lower part of the millimeter-wave spectrum band (i.e., below 28 GHz) do not exhibit enough directivity and selectively, as their counterparts in higher bands of the spectrum (i.e., above 60 GHz), and thus still suffer…
Recent applications of the Full Duplex (FD) technology focus on enabling simultaneous control communication and data transmission to reduce the control information exchange overhead, which impacts end-to-end latency and spectral efficiency.…
Cognitive radio (CR) is an important technique for improving spectral efficiency, letting a secondary system operate in a wireless spectrum when the primary system does not make use of it. While it has been widely explored over the past 25…
Millimeter wave (mmWave) multiple-input-multi-output (MIMO) is now a reality with great potential for further improvement. We study full-duplex transmissions as an effective way to improve mmWave MIMO systems. Compared to half-duplex…
Due to the high cost and low energy efficiency of the dedicated radio frequency (RF) chains, the number of RF chains in a millimeter wave (mmWave) multiple-input multiple-output (MIMO) system is usually limited from a practical point of…
This paper investigates the problem of spectrally efficient operation of a multiuser uplink cognitive radio system in the presence of a single primary link. The secondary system applies opportunistic interference cancelation (OIC) and…
In this paper, we investigate the system performance of a multi-cell multi-user (MU) hybrid millimeter wave (mmWave) multiple-input multiple-output (MIMO) network adopting the channel estimation algorithm proposed in [1] for channel…