Related papers: Experimental Study on Laminar Burning Speed for An…
The effects of initial pressure and temperature on the laminar burning speed of n-hexane-air mixtures were investigated experimentally and numerically. The spherically expanding flame technique with a nonlinear extrapolation procedure was…
To better understand the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with n-butylbenzene has been investigated. The inlet gases contained 7.1% (molar)…
In order to better understand the chemistry involved during the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with indane has been investigated. The gases of this flame contains 7.1%…
In line with the studies presented in the parts I and II of this paper, the structure of a laminar rich premixed methane flame doped with cyclopentene has been investigated. The gases of this flame contains 15.3% (molar) of methane, 26.7%…
Autoignition delay experiments were performed for n-butanol in a heated rapid compression machine. Experiments were performed at pressures of 15 and 30 bar, in the temperature range 650-900 K, and for equivalence ratios of 0.5, 1.0, and…
Fuel-flexible, low-carbon combustion systems need to accommodate methane/hydrogen mixtures with air and exhaust-gas dilution. To develop these, we require accurate and efficient correlations for laminar flame speed (LFS). In this work, we…
Cold, continuous, high flux beams of benzonitrile, fluorobenzine, and anisole have been created. Buffer-gas cooling with a cryogenic gas provides the cooling and slow forward beam velocities. The beam of benzonitrile was measured to have a…
The structure of three laminar premixed rich flames has been investigated: a pure methane flame and two methane flames doped by allene and propyne, respectively. The gases of the three flames contain 20.9% (molar) of methane and 33.4% of…
The structure of a laminar rich premixed 1,3-C4H6/CH4/O2/Ar flame have been investigated. 1,3-Butadiene, methane, oxygen and argon mole fractions are 0.033; 0.2073; 0.3315, and 0.4280, respectively, for an equivalent ratio of 1.80. The…
In line with the study presented in the part I of this paper, the structure of a laminar rich premixed methane flame doped with 1,3-butadiene has been investigated. The flame contains 20.7% (molar) of methane, 31.4% of oxygen and 3.3% of…
Autoignition delay experiments for the isomers of butanol, including n-, sec-, tert-, and iso-butanol, have been performed using a heated rapid compression machine. For a compressed pressure of 15 bar, the compressed temperatures have been…
Butanol, an alcohol which can be produced from biomass sources, has received recent interest as an alternative to gasoline for use in spark ignition engines and as a possible blending compound with fossil diesel or biodiesel. Therefore, the…
The autoignition delays of iso-butanol, oxygen, and nitrogen mixtures have been measured in a heated rapid compression machine (RCM). At compressed pressures of 15 and 30 bar, over the temperature range 800-950 K, and for equivalence ratio…
This paper describes an experimental and modeling study of the oxidation of the three isomers of xylene (ortho-, meta- and para-xylenes). For each compound, ignition delay times of hydrocarbon-oxygen-argon mixtures with fuel equivalence…
Autoignition experiments for n-butanol have been performed using a heated rapid compression machine at compressed pressures of 15 and 30 bar, in the compressed temperature range of 675-925 K, and for equivalence ratios of 0.5, 1.0, and 2.0.…
The hydrodynamics of the dense confining fuel shell is of great importance in defining the behaviour of the burning plasma and burn propagation regimes of inertial confinement fusion experiments. However, it is difficult to probe due to its…
Large hydrocarbon fuels are used for ground and air transportation and will be for the foreseeable future. Despite their extensive use, turbulent combustion of large hydrocarbon fuels, remains relatively poorly understood and difficult to…
Ammonia is a promising zero-carbon fuel for industrial and transport applications, but its combustion is hindered by flame instabilities, incomplete oxidation, and the formation of nitrogen oxides. Accurate and detailed kinetic models are…
Flame propagation through a non-volatile solid-fuel suspension is studied using a simplified, time-dependent numerical model that considers the influence of both diffusional and kinetic rates on the particle combustion process. It is…
Large eddy simulation of propane/air jet flame in the wrinkled flamelets regime of the Borghi diagram is used to assess the performance of a recently developed consumption speed correction model in premixed combustion. The combustion is…