Related papers: Insight into bulk niobium superconducting RF cavit…
Superconducting radio-frequency (SRF) niobium cavities are critical for modern particle accelerators, as well as for advancing superconducting quantum systems and enabling ultra-sensitive searches for new physics. In this work, we report a…
The Q-factor of superconducting accelerating cavities can be substantially improved by a special heat treatment under N2 atmosphere (N-doping). Recent experiments at Fermi National Laboratory investigated the dependence of Q on the RF…
Tunneling spectroscopy was performed on Nb pieces prepared by the same processes used to etch and clean superconducting radio frequency (SRF) cavities. Air exposed, electropolished Nb exhibited a surface superconducting gap delta=1.55 meV,…
Niobium superconducting radio-frequency (SRF) cavities for high energy accelerator applications have been greatly improved in terms of the quality factor $Q$ by techniques such as Nitrogen doping. However, the mechanisms leading improvement…
Experimental data on N-doped superconducting (sc) cavities are further analyzed which contribute to confirm a recently proposed model explaining the increase of the Q-value versus the accelerating gradient.
Niobium superconducting radiofrequency cavities enable applications in modern accelerators and quantum computers. However, the surface resistance significantly deteriorates the cavities performance. Nitrogen doping surface treatment can…
We propose a model to explain power dissipation leading to the formation of hot spots in the inner walls of niobium thin film superconducting RF cavities. The physical mechanism that we explore is due to the constriction of surface…
A systematic study is presented on the superconductivity (sc) parameters of the ultrapure niobium used for the fabrication of the nine-cell 1.3 GHz cavities for the linear collider project TESLA. Cylindrical Nb samples have been subjected…
Future particle accelerators such as the the SLAC ``Linac Coherent Light Source-II'' (LCLS-II) and the proposed Cornell Energy Recovery Linac (ERL) require hundreds of superconducting radio-frequency (SRF) cavities operating in continuous…
The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the…
The radio-frequency surface resistance of niobium resonators is incredibly reduced when nitrogen impurities are dissolved as interstitial in the material, conferring ultra-high Q-factors at medium values of accelerating field. This effect…
We report the rf performance of a single-cell superconducting radiofrequency cavity after low temperature baking in a nitrogen environment. A significant increase in quality factor has been observed when the cavity was heat treated in the…
We report the RF performance of several single-cell superconducting radio-frequency cavities subjected to low temperature heat treatment in nitrogen environment. The cavities were treated at temperature 120 - 165 $^{\circ}$C for an extended…
Nitrogen doping study on niobium (Nb) samples used for the fabrication of the superconducting radio frequency (SRF) cavities has been carried out. The samples' surface treatment was attempted to replicate that of the SRF cavities, which…
The electron-doped cuprates Pr_{2-x}Ce_xCuO_4 and Nd_{2-x}Ce_xCuO_4 have been studied by electronic Raman spectroscopy across the entire region of the superconducting (SC) phase diagram. The SC pairing strength is found to be consistent…
Since the late '80s, CERN has pioneered the development of niobium thin film radio-frequency (RF) cavities deposited on copper substrates for several particle accelerator applications. However, niobium thin film cavities historically…
The nature and concentration of defects near niobium-silicon interfaces prepared with different silicon surface treatments were characterized using current-voltage (I-V), deep level transient spectroscopy (DLTS), and secondary ion mass…
We report on the preparation of carbon nanotube quantum dots using superconducting electrodes made of niobium. Gate-controllable supercurrents with values of up to 30 nA are induced by the proximity effect. The IV-curves are hysteretic at…
Cool-down dynamics of superconducting accelerating cavities became particularly important for obtaining very high quality factors in SRF cavities. Previous studies proved that when cavity is cooled fast, the quality factor is higher than…
Point contact tunneling (PCT) and low energy muon spin rotation (LE-muSR) are used to probe, on the same samples, the surface superconducting properties of micrometer thick niobium films deposited onto copper substrates using different…