Related papers: Bench Measurements and Simulations of Beam Couplin…
In the first part of the paper a generalized theoretical approach towards beam coupling impedances and stretched-wire measurements is introduced. Applied to a circular symmetric setup, this approach allows to estimate the systematic…
The concepts of wake fields and impedance are introduced to describe the electromagnetic interaction of a bunch of charged particles with its environment in an particle accelerator. The wake fields can act back on the beam and lead to…
In many cases beam coupling impedances or wake fields are calculated with computer simulator such as CST Studio Suite, GdfidL Electromagnetic Field Simulator and so on. But evaluation with the stretched-wire method is still very useful by…
Coaxial wire measurements have provided a simple and effective way to measure the beam coupling impedance of accelerator structures for a number of years. It has been known how to measure the longitudinal and dipolar transverse impedance…
The beam coupling impedances of small obstacles protruding inside the vacuum chamber of an accelerator are calculated analytically at frequencies for which the wavelength is large compared to a typical size of the obstacle. Simple formulas…
Impedance is one of the vital parameters that provides useful information for many power electronics related applications. A lot of impedance measurement methods in power electronics have been reported. However, a comprehensive…
An analytical method is developed for calculating the geometric wakefield and impedances of an ultrarelativistic beam propagating on- and off-axis through an axially symmetric geometry with slowly varying circular cross-section, such as a…
The first mention of the impedance concept appeared on November 1966 in the CERN internal report "Longitudinal instability of a coasting beam above transition, due to the action of lumped discontinuities" by V.G. Vaccaro. This was the…
A general derivation of the beam coupling impedances produced by small discontinuities on the wall of the vacuum chamber of an accelerator is reviewed. A collection of analytical formulas for the impedances of small obstacles is presented.
In this paper we present several techniques for characterizing longitudinal impedances based on transient measurements of the growth rates and tune shifts of unstable coupled-bunch modes. These techniques are applicable to measurement of…
In-circuit impedance measurement provides useful information for many EMC applications. The inductive coupling approach is a promising in-circuit impedance measurement method due to its non-contact characteristics and simple on-site…
In particle accelerators, pumping holes in a vacuum chamber can be a source of unwanted broadband coupling impedance, leading to beam instabilities. Analytical methods have been previously developed to estimate the impedance of holes in…
In-circuit impedance provides key information for many EMC applications. The inductive coupling approach is a promising method for in-circuit impedance measurement because its measurement setups have no direct electrical contact with the…
A systematic exposition of the basic concepts of wakes and impedances is given for relativistic beams in accelerators.
The impedance measurement technique consists in that the phase-dependent (parametric) inductance of the system is probed by the classical tank circuit via measuring the voltage. The notion of the parametric inductance for the impedance…
The coaxial wire method is a common and appreciated technique to assess the beam coupling impedance of an accelerator element from scattering parameters. Nevertheless, the results obtained from wire measurements could be inaccurate due to…
The beam coupling impedances of small axisymmetric obstacles having a semi-elliptical cross section along the beam in the vacuum chamber of an accelerator are calculated at frequencies for which the wavelength is large compared to a typical…
A general theory of the beam interaction with small discontinuities of the vacuum chamber is developed taking into account the reaction of radiated waves back on the discontinuity. The reactive impedance calculated earlier is reproduced as…
We propose the design of an impedance matching acoustic bend in this article. The bending structure is composed of sub-wavelength unit cells with perforated plates and side pipes, whose mass density and bulk modulus can be tuned…
High impedance connecting links and cables are modeled at low frequency in terms of their impedance to ground and to neigbouring connecting links. The impedance is usually considered to be the parallel combination of a resistance and a…