Related papers: Spatial Covariance Estimation for Millimeter Wave …
Millimeter wave (mmWave) communication is one feasible solution for high data-rate applications like vehicular-to-everything communication and next generation cellular communication. Configuring mmWave links, which can be done through…
Configuring the antenna arrays is the main source of overhead in millimeter wave (mmWave) communication systems. In high mobility scenarios, the problem is exacerbated, as achieving the highest rates requires frequent link reconfiguration.…
Future wireless multiple-input multiple-output (MIMO) communication systems will employ sub-6 GHz and millimeter wave (mmWave) frequency bands working cooperatively. Establishing a MIMO communication link usually relies on estimating…
The spectrum scarcity at sub-6 GHz spectrum has made millimeter-wave (mmWave) frequency band a key component of the next-generation wireless networks. While mmWave spectrum offers extremely large transmission bandwidths to accommodate…
To support the high data rates for latency-critical applications, future wireless systems will employ fully digital beamforming multiple-input multiple-output (MIMO) architectures at millimeter wave (mmWave) frequencies. Moreover, mmWave…
The rollout of millimeter-wave (mmWave) cellular network enables us to realize the full potential of 5G/6G with vastly improved throughput and ultra-low latency. MmWave communication relies on highly directional transmission, which…
Future wireless multiple-input multiple-output (MIMO) systems will integrate both sub-6 GHz and millimeter wave (mmWave) frequency bands to meet the growing demands for high data rates. MIMO link establishment typically requires accurate…
Hybrid massive MIMO structures with lower hardware complexity and power consumption have been considered as a potential candidate for millimeter wave (mmWave) communications. Channel covariance information can be used for designing…
This work investigates the problem of spatial covariance matrix estimation in a millimeter-wave (mmWave) hybrid multiple-input multiple-output (MIMO) system with an emphasis on the basis-mismatch effect. The basis mismatch is prevalent in…
The tremendous bandwidth available in the millimeter wave (mmW) frequencies between 30 and 300 GHz have made these bands an attractive candidate for next-generation cellular systems. However, reliable communication at these frequencies…
Millimeter-wave (mmWave) channels, which occupy frequency ranges much higher than those being used in previous wireless communications systems, are utilized to meet the increased throughput requirements that come with 5G communications. The…
Using out-of-band (OOB) side-information has recently been shown to accelerate beam selection in single-user millimeter wave (mmWave) massive MIMO communications. In this paper, we propose a novel OOB-aided beam selection framework for a…
Millimeter wave (mmWave) cellular systems will enable gigabit-per-second data rates thanks to the large bandwidth available at mmWave frequencies. To realize sufficient link margin, mmWave systems will employ directional beamforming with…
We propose a deep learning-based method that uses spatial and temporal information extracted from the sub-6GHz band to predict/track beams in the millimeter-wave (mmWave) band. In more detail, we consider a dual-band communication system…
Future wireless communication systems will integrate both sub-6 GHz and millimeter wave (mmWave) frequency bands within multi-antenna architectures to meet the increasing demand for high data rates. In such multi-band systems, reliable…
Configuring millimeter wave links following a conventional beam training protocol, as the one proposed in the current cellular standard, introduces a large communication overhead, specially relevant in vehicular systems, where the channels…
Spatial channel covariance information can replace full knowledge of the entire channel matrix for designing analog precoders in hybrid multiple-input-multiple-output (MIMO) architecture. Spatial channel covariance estimation, however, is…
Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of…
In this paper, we develop a low-complexity channel estimation for hybrid millimeter wave (mmWave) systems, where the number of radio frequency (RF) chains is much less than the number of antennas equipped at each transceiver. The proposed…
Hybrid analog and digital precoding allows millimeter wave (mmWave) systems to achieve both array and multiplexing gain. The design of the hybrid precoders and combiners, though, is usually based on knowledge of the channel. Prior work on…