Related papers: Sub-picotesla widely tunable atomic magnetometer o…
We present a method for absolute calibration of received radio-frequency in the ultra low frequency (ULF), and very low frequency (VLF) range. This is achieved with the use of a radio frequency optically pumped magnetometer (RF-OPM). We…
We experimentally demonstrate stable trapping of a permanent magnet sphere above a lead superconductor, in vacuum pressures of $4 \times 10^{-8}$~mbar. The levitating magnet behaves as a harmonic oscillator, with frequencies in the 4-31~Hz…
A scheme of an ultra-sensitive magnetometer in the cavity quantum electromagnonics where the intracavity microwave mode coupled to a magnonic mode via magnetic dipole interaction is proposed. It is shown that by driving both magnonic and…
We have built a variable temperature scanning probe microscope (SPM) that covers 4.6 K - 180 K and up to 7 Tesla whose SPM head fits in a 52 mm bore magnet. It features a temperature-controlled sample stage thermally well isolated from the…
We present the prototype module of our extendible and robust multichannel SQUID magnetometer system. A multi-module arrangement can be implemented by using up to 7 modules. It is intended for high-precision measurements of biomagnetism and…
Feshbach resonances, which allow for tuning the interactions of ultracold atoms with an external magnetic field, have been widely used to control the properties of quantum gases. We propose a~scheme for using scattering resonances as a…
Developing robust microwave-field sensors is both fundamentally and practically important with a wide range of applications from astronomy to communication engineering. The Nitrogen-Vacancy (NV) center in diamond is an attractive candidate…
Radio-frequency (14.6 MHz) AC magnetic susceptibility, $\chi^{\prime}_{AC}$, of \dytio\ was measured using a self-oscillating tunnel-diode resonator. Measurements were made with the excitation AC field parallel to the superimposed DC…
We report on a scanned superconducting quantum interference device (SQUID) microscope operating in a cryogen-free cryostat, with the capability of up to forty RF connections with 20 GHz bandwidth to a device under test. The system utilizes…
Ultra-low field (ULF) MRI is a promising method for inexpensive medical imaging with various additional advantages over conventional instruments such as low weight, low power, portability, absence of artifacts from metals, and high…
Torque magnetometry is a key method to measure the magnetic anisotropy and quantum oscillations in metals. In order to resolve quantum oscillations in sub-millimeter sized samples, piezo-electric micro-cantilevers were introduced. In the…
In this work we demonstrate a high sensitivity atomic gradiometer capable of operation in earth-field level environments. We apply a light-pulse sequence at four times the Larmor frequency to achieve gradiometer sensitivity <20…
This paper introduces a method for characterizing the current noise of commercial constant-current sources(CCSs) using a free-induction-decay(FID) type optically-pumped rubidium atomic magnetometer driven by a radio-frequency(RF) magnetic…
We have designed low noise temperature sensing and control units with the objective of using them for the fabrication of far infrared active cavity radiometers. The sensing unit, first characterized at 300K using industrial platinium…
We demonstrate a cavity-enhanced room-temperature magnetic field sensor based on nitrogen-vacancy centers in diamond. Magnetic resonance is detected using absorption of light resonant with the 1042 nm spin-singlet transition. The diamond is…
Manipulating the electromagnetic spectrum at the single-photon level is fundamental for quantum experiments. In the visible and infrared range, this can be accomplished with atomic quantum emitters, and with superconducting qubits such…
The design and operation of a homemade low cost vibrating sample magnetometer is described here. The sensitivity of this instrument is better than 10-2 emu and found to be very efficient for the measurement of magnetization of most of the…
We report on the design, fabrication, and implementation of ultrasensitive micromechanical oscillators. Our ultrathin single-crystal silicon cantilevers with integrated magnetic structures are the first of their kind: They are fabricated…
Magnetic sensors are important for detecting nuclear magnetization signals in nuclear magnetic resonance (NMR). As a complementary analysis tool to conventional high-field NMR, zero- and ultralow-field (ZULF) NMR detects nuclear…
Sensors based on spin qubits in 2D crystals offer the prospect of nanoscale sensing volumes, where the close proximity of the sensor and source could provide access to otherwise inaccessible signals. For AC magnetometry, the sensitivity and…