Related papers: Solution-processed ZnO as the efficient passivatio…
In recent years, considerable efforts have been devoted to developing novel electron-selective materials for crystalline Si (c-Si) solar cells with the attempts to simplify the fabrication process and improve efficiency. In this study,…
Among the n-type metal oxide materials used in the planar perovskite solar cells, zinc oxide (ZnO) is a promising candidate to replace titanium dioxide (TiO2) due to its relatively high electron mobility, high transparency, and versatile…
Si doped ZnO has been reported to be a better conductor than pure ZnO. It is reported that carrier density increases and hence conductivity increases. However, the effect on optical transmission is yet not clear until our recent report [1].…
We present a "one-step" approach to modify ZnO electron transport layers (ETLs) used in organic solar cells. This approach involves adding benzoic acid (BZA) derivatives directly to the ZnO precursor solution, which are then present at the…
We have employed state-of-the-art cross-correlation noise spectroscopy to study carrier dynamics in silicon heterojunction solar cells, complimented by SENTARUS simulations of the same devices. These cells were composed of a light absorbing…
A Copper-Zinc-Tin-Sulphide (CZTS)based solar cell with a modified ce3ll configuration of Mo/SnS/CZTS/SnS2/ZnO is simulated using SCAPS. An SnS2 buffer layer is used in simulation instead of the standard CdS layer. An additional back surface…
We report the (111) facet-engineered cubic phase SnO2 (C-SnO2) as a novel electron transport layer (ETL) for triple-cation mixed-halide Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 perovskite solar cells (PSCs). The C-SnO2 layer was prepared…
With the usage of two transparent electrodes, organic solar cells are semitransparent and may be combined to parallel-connected multi-junction devices or used for innovative applications like power-generating windows. A challenging issue is…
NiO/ZnO-based thin films, including single-layer and heterostructure configurations, were synthesized to investigate the influence of stacking order on their electrochemical performance for supercapacitor applications. To improve the…
An approach is presented to modify the WF of solution-processed sol-gel derived ZnOover an exceptionally wide range of more than 2.3 eV. This approach relies on the formation of dense and homogeneous self-assembled monolayers based on…
The p-type amorphous/ n-type crystalline silicon (P+ a-Si/N+ c-Si) heterojunction was simulated for developing the solar cells with high conversion efficiency and low cost. The characteristic of such cells with different work function of…
Colloidal zinc oxide (ZnO) nanoparticles are frequently used in the field of organic photovoltaics for the realization of solution-producible, electron-selective interfacial layers. Despite of the widespread use, there is a lack of detailed…
As a potential solution for low-cost efficient solar cells, radial junctions consisting of ZnO nanowires arrays embedded in Cu2O thin films have been theoretically modeled. Calculations have been performed to explore the geometric…
In this article, a novel hot wire oxidation-sublimation deposition (HWOSD) technique was developed to prepare molybdenum oxide (MoOx) thin films with high quality. Silicon heterojunction (SHJ) solar cells with the HWOSD MoOx as a hole…
In this work, layered perovskite SBN was investigated in a new doped form for hole as well as electron transport layer (HTL/ETL) in perovskite solar cells. This work was targeted to conclude the effect of tin doping in lanthanum-bismuth…
In this paper, the reported experimental data in [Sci. Rep., 2012, 2, 533] related to electrical transport properties in bulk ZnO, ZnMgO/ZnO, and ZnMgO/ZnO/ZnMgO single and double heterostructures were analyzed quantitatively and the most…
Solar modules are currently characterized at standard test conditions (STC), defined at 1000W/m2 and 25 {\deg}C. However, solar modules in actual outdoor operating conditions typically operate at lower illumination and higher temperature…
Solar cells with the structure ITO-PEDOT:PSS-Ag:SnS-Al were fabricated with the active layer of tin sulphide with silver nano-particles (Ag:SnS) grown by thermal co-evaporation. To understand the influence of the silver nanoparticles on the…
Sulfide chalcopyrite, Cu(In,Ga)S2, having wide bandgap (larger than 1.5 eV), favorable optoelectronic properties, and high stability, is a promising top-cell absorber for tandem applications. Adapting device structures optimized for 1.0 -…
Lead-free all-inorganic halide perovskite solar cells (PSCs) have emerged as a promising alternative to toxic lead-based solar cells and organic solar cells, which have limited stability. This work explores such a PSC with sodium tin…