Related papers: An open and flexible digital phase-locked loop for…
We report the frequency noise suppression of a 674nm diode laser by phase-locking it to a 1560nm cavity-stabilized laser, using a commercial optical frequency comb. By phase-locking the frequency comb to the narrow reference at telecom…
Electronic systems for qubit control and measurement serve as a bridge between quantum programming language and quantum information processors. With the rapid development of superconducting quantum circuit (SQC) technology, synchronization…
We report on a device to electronically stabilize the optical injection lock of a semiconductor diode laser. Our technique uses as discriminator the peak height of the laser's transmission signal on a scanning Fabry-Perot cavity and feeds…
We demonstrate the distribution of single-photon-level pulses from a mode-locked laser source over a phase-stable fiber link, achieving an optical timing jitter of less than 100 as over 10 minutes of data accumulation. This stability…
To meet the requirements of time-frequency networks and enable frequency downloadability for nodes along the link, we demonstrated the extraction of stable frequency signals at nodes using a mode-locked laser under the condition of 100 km…
A polarization switching pulse interleaver is shown to be effective in reducing timing noise due to polarization mode dispersion in time and frequency transfer based on mode-locked lasers and standard single-mode fibres. In closed-loop time…
We estimate the laser frequency noise impact on coherent sensing using Distributed Fiber Sensing model. By stabilizing the laser in the estimated frequency zone, we demonstrate reduced noise floor over 100km using optimized probing codes
We present an all-digital method for stabilising the phase biases in an electro-optic I/Q modulator for carrier-suppressed single-sideband modulation. Building on the method presented in S. Wald \ea, Appl. Opt. \textbf{62}, 1-7 (2023), we…
We developed a compact and easy-to-use phase meter based on a zero-crossing counting algorithm for digitized signals. Owing to the algorithm, the phase meter has low-noise and wide dynamic range. Low-noise differential phase measurements…
We report on the development of a frequency modulatable 795 nm semiconductor laser based on self-injection locking to a high quality factor whispering gallery mode microresonator. The laser is characterized with residual amplitude…
We demonstrate a combination of optical and electronic feedback that significantly narrows the linewidth of distributed Bragg reflector lasers (DBRs). We use optical feedback from a long external fiber path to reduce the high-frequency…
In this paper, we present an experimental study of the metrological stabilization of a solid-state frequency comb for embedded metrology applications. The comb is a passively mode-locked laser diode based on InGaAs/InP Quantum-dash…
Laser phase noise remains a limiting factor in many experimental settings, including metrology, time-keeping, as well as quantum optics. Hitherto this issue was addressed at low frequencies, ranging from well below 1 Hz to maximally 100…
We report the frequency stabilization of an erbium-doped fiber distributed-feedback laser using an all-fiber based Michelson interferometer of large arm imbalance. The interferometer uses a 1 km SMF-28 optical fiber spool and an acousto…
Laser frequency stabilization is a critical part of the interferometry measurement system of space-based gravitational wave observatories such as the Laser Interferometer Space Antenna (LISA). Arm locking as a proposed frequency…
Performances of an adaptive optics (AO) system are directly linked with the quality of its alignment. During the instrument calibration, having open loop fast tools with a large capture range are necessary to quickly assess the system…
A narrow-bandwidth actively mode-locked laser using a Cr:ZnS gain medium has been successfully demonstrated. A free-space electro-optic phase modulator is employed in the solid-state laser resonator to achieve frequency-modulation (FM)…
Frequency-stable lasers enable high-fidelity quantum state manipulation, which forms the basis of optical atomic clocks, quantum sensing, and quantum computation. Performing state manipulations at increasingly high speeds requires attention…
We present a simple and effective method to implement an active stabilization of a diode laser with injection locking, which requires minimal user intervenes. The injection locked state of the diode laser is probed by a photodetector, of…
We experimentally demonstrate the realization of a half-polarization-maintaining (half-PM) fiber laser, in which mode-locking is provided by a reflective multimode-interference saturable absorber (SA). In the specially designed SA, linearly…