Related papers: HPL-GEM: Controlling High Pressure Laminates bulk …
To solve the discharge of the standard Bulk Micromegas and GEM detector, the GEM-Micromegas detector was developed in Institute of High Energy Physics. Taking into account the advantages of the two detectors, one GEM foil was set as a…
A prototype Dual Gain Multilayer Thick Gas Electron Multilyer (DG-M-THGEM) with an active area of 10 cm $\times$ 10 cm was manufactured aiming at the production of a large-volume active-target time projection chamber which can work under…
We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment…
With future experiments proposing detectors that utilize very large-area GEM foils, there is a need for commercially available GEM foils. Double-mask etching techniques pose a clear limitation in the maximum size of GEM foils. In contrast,…
Gas electron multiplier (GEM) is widely used in modern gas detectors of ionizing radiation in experiments on high-energy physics at accelerators and in other fields of science. Typically the GEM devices are based on a dielectric foil with…
High voltage (~2 kV) AlGaN-channel HEMTs were fabricated with 64% Aluminum composition in the channel. The average on-resistance was ~75 ohm. mm (~21 miliohm. cm^2) for LGD = 20 microns. Breakdown voltage reached >3 kV (tool limit) before…
The shift to electric and hybrid powertrains in vehicular systems has propelled advancements in mobile robotics and autonomous vehicles. This paper examines the sensitivity of key performance metrics in a electrified heavy-duty mobile…
Triple-GEM detector technology was recently selected by CMS for a part of the upgrade of its forward muon detector system as GEM detectors provide a stable operation in the high radiation environment expected during the future…
A novel instrument has been developed to monitor and record the ambient pa- rameters such as temperature, atmospheric pressure and relative humidity. These parameters are very essential for understanding the characteristics such as gain of…
The $1s^2->1s2p(^1P)$ excitation in confined and compressed helium atoms in either the bulk material or encapsulated in a bubble is shifted to energies higher than that in the free atom. For bulk helium, the energy shifts predicted from…
Lithium (Li) metal anodes are essential for developing next-generation high-energy-density batteries. However, Li dendrite/whisker formation caused short-circuiting issue and short cycle life have prevented lithium metal from being viably…
THick Gas Electron Multipliers (THGEMs) are robust and high gain Micro Pattern Gaseous Detectors which are economically manufactured by standard drilling and etching of thin printed circuit boards. In this paper, we present our recent…
Current developments of high-speed magnetic levitation technology using the principle of the electromagnet suspension (EMS) focus on reaching vehicle speeds of more than 600 km/h. With increasing vehicle speeds, however, updated control…
In this work we (i) extend previous 1D studies of electromagnetic (EM) wave propagation in an over-dense plasma-metamaterial composite into two spatial dimensions and (ii) study blocking of EM waves by the composite 2D structures…
Polymer light-emitting devices were fabricated utilizing plasma polymerized thin films as emissive layers. These conjugated polymer films were prepared by RF Plasma Enhanced Chemical Vapor Deposition (PECVD) using naphthalene as monomer.…
We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied…
We report on the systematic study of a single-gas-electron-multiplication (GEM) loaded gaseous detector developed for precision measurements of high-energy particle beams and dose-verification measurements. In the present study, a…
A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.
The entirely soft and transformable room-temperature liquid metal battery based on 3D hybrid printing was proposed and experimentally demonstrated. Liquid metal gallium and conductive gel were employed as the negative and positive electrode…
General Matrix Multiplication (GEMM) is a critical operation underpinning a wide range of applications in high-performance computing (HPC) and artificial intelligence (AI). The emergence of hardware optimized for low-precision arithmetic…