Related papers: Void growth and coalescence in irradiated copper u…
Molecular dynamics simulations in three-dimensional copper have been performed to quantify the void coalescence process leading to fracture. The correlated growth of the voids during their linking is investigated both in terms of the onset…
Void coalescence and interaction in dynamic fracture of ductile metals have been investigated using three-dimensional strain-controlled multi-million atom molecular dynamics simulations of copper. The correlated growth of two voids during…
The ductile fracture process in porous metals due to growth and coalescence of micron scale voids is not only affected by the imposed stress state but also by the distribution of the voids and the material size effect. The objective of this…
Slow crack propagation in ductile, and in certain brittle materials, appears to take place via the nucleation of voids ahead of the crack tip due to plastic yields, followed by the coalescence of these voids. Post mortem analysis of the…
The effect of hydrogen on the fracture behaviour of austenitic stainless steel has been investigated in the past [1][2]. It has been reported that fracture initiates by void formation at inclusions and regions of enhanced strain…
Voids can be observed at various scales in ductile materials, frequently of sizes lower than the grain size, leading to porous single crystals materials. Two local deformation modes of porous ductile (single crystals) materials have been…
The effect of stress-triaxiality on growth of a void in a three dimensional single-crystal face-centered-cubic (FCC) lattice has been studied. Molecular dynamics (MD) simulations using an embedded-atom (EAM) potential for copper have been…
Voids are one of the many material defects present at the microscopic length scale. They are primarily responsible for the formation of cracks and hence contribute to ductile fracture. Circular voids tend to deform into elliptical voids…
A novel phase-field for ductile fracture model is presented. The model is developed within a consistent variational framework in the context of finite-deformation kinematics. A novel coalescence dissipation introduces a new coupling…
Radiation creep and swelling are irreversible deformation phenomena occurring in materials irradiated even at low temperatures. On the microscopic scale, energetic particles initiate collision cascades, generating and eliminating defects…
Ductile fracture has been extensively studied in metals with weak mechanical anisotropy such as copper and aluminum. The fracture of more anisotropic metals, especially those with a hexagonal crystal structure (e.g. titanium), remains far…
Processes of coalescence and fragmentation are used to understand the time-evolution of the mass distribution of various systems and may result in a steady state or in stable deterministic or stochastic cycles. Motivated by applications in…
The fracture process of commercially pure titanium was visualized in model materials containing artificial holes. These model materials were fabricated using a femtosecond laser coupled with a diffusion bonding technique to obtain voids in…
Understanding the mechanisms of plasticity in structural steels is essential for the operation of next-generation fusion reactors. Elemental composition, particularly the amount of Cr present, and irradiation can have separate and…
Three dimensional calculations of ductile crack growth under mode I plane strain, small scale yielding conditions are carried out using an elastic-viscoplastic constitutive relation for a progres- sively cavitating plastic solid with two…
Analytical models have been developed for fracture propagation over the last several decades and are now considered with renewed interest; the range of their applicability varies for different materials and different loading conditions.…
Macroscopic voids at the steel-concrete interface and their degree of saturation with an aqueous electrolyte are known to play an important role in the corrosion of steel in reinforced concrete. Irrespective of the exposure conditions and…
Ductile fracture through void growth and coalescence depends significantly on the plastic anisotropy of the material and on void size, as shown by experiments and/or numerical simulations through several studies. Macroscopic (homogenized)…
(Abridged, full abstract available in the text) The main goal of the study presented in this thesis was to perform in-situ investigations on deformation structures in plastically deformed polycrystalline copper at low degrees (<5%) of…
In this study, the crack propagation of the pre-cracked mono-crystal nickel with the voids and inclusions has been investigated by molecular dynamics simulations. Different sizes of voids, inclusions and materials of inclusions are used to…