Related papers: Love wave gas sensor based on DWNTs sensitive mate…
We study the sensitivity limits of a broadband gravitational-waves detector based on dual resonators such as nested spheres. We determine both the thermal and back-action noises when the resonators displacements are read-out with an…
Detection of Volatile Organic Compounds (VOCs) from the breath is becoming a viable route for the early detection of diseases non-invasively. This paper presents a sensor array with three metal oxide electrodes that can use machine learning…
We present a model of a novel measurement scheme to detect small amounts of a gas species via the ground-state fluctuations of the electromagnetic field (dispersion forces) depending on the entire spectral properties of all objects. Here,…
Due to high surface to volume ratio and tunable band gap, 2 Dimensional (2D) layered materials such as MoS2, is good candidate for gas sensing applications. This research mainly focuses on variation of Density of States (DOS) of MoS2…
The viscosity of oxygen-functionalized multi-walled carbon nanotube (O-MWCNT) nanofluids was measured for concentrations from 0.1 to 10 ppm under conditions of 0 to 30 MPag pressures and 0 to 10 C temperatures. The presence of O-MWCNTs did…
High bias electrical transport characteristics of freely suspended metallic single-walled carbon nanotubes (SWNTs) are investigated at 250-400K in vacuum and various gases. Self-heating is exploited to examine the temperature dependence of…
Chemical sensing properties of single wire and mat form sensor structures fabricated from the same carbon nanotube (CNT) materials have been compared. Sensing properties of CNT sensors were evaluated upon electrical response in the presence…
Ambient humidity poses a significant challenge in the development of practical room temperature NO$_2$ gas sensors. Here, we employ atomically precise zigzag edges in multilayer MoS$_2$, fabricated using electron beam lithography and…
As a part of this project, we have developed an IoT-based instrument utilizing the NODE MCU-ESP8266 module, MQ135 gas sensor, and DHT-11 sensor for measuring CO$_2$ levels in parts per million (ppm), temperature, and humidity. The…
Nanoelectromechanical systems (NEMS) have generated considerable interest as inertial mass sensors. NEMS resonators have been used to weigh cells, biomolecules, and gas molecules, creating many new possibilities for biological and chemical…
We describe the application of nanoelectromechanical systems (NEMS) to ultrasensitive mass detection. In these experiments, a modulated flux of atoms was adsorbed upon the surface of a 32.8 MHz NEMS resonator within an ultrahigh vacuum…
We have investigated the impact of toxic N2O gas upon structural and electronic properties of 2D MoSe2 monolayer using DFT approach. In this work, as a result of N2O gas absorption, charge transfer, band gap and density of states (DOS) are…
Double-walled carbon nanotubes (DWCNTs) with high graphitization have been synthesized by hydrogen arc discharge. The obtained DWCNTs have a narrow distribution of diameters of both the inner and outer tubes, and more than half of the…
The high-bias electrical transport properties of suspended metallic single-walled carbon nanotubes (SWNTs) are investigated at various temperatures in vacuum, in various gases and when coated with molecular solids. It is revealed that…
Chemical gas sensors based on nanowires can find a wide range of applications in clinical assaying, environmental emission control, explosive detection, agricultural storage and shipping, and workplace hazard monitoring. Sensors in the…
Kapton HN films, adopted worldwide due to their superior thermal durability (up to 400 {\deg}C), allow the high temperature sintering of nanoparticle based metal inks. By carefully selecting inks and Kapton substrates, outstanding thermal…
Magnetic field measurement including a temperature compensation is essential for a magnetic field sensor. This study investigates a magnetic surface acoustic wave (MSAW) sensor in a reflective delay line configuration with two acoustic…
Chemical and infra-red sensors generate distinct responses under similar conditions because of sensor drift, noise or resolution errors. In this work, we use different time-series data sets obtained by infra-red and E-nose sensors in order…
Two-dimensional transition metal dichalcogenides (TMDs) are highly appealing for gas sensors, lab-on-a-chip devices and bio-sensing applications because of their strong light-matter interaction and high surface-to-volume ratio. The ability…
The development of high-performing sensing materials, able to detect ppb-trace concentrations of volatile organic compounds at low temperatures, is required for the development of next-generation miniaturized wireless sensors. Here, we…