Related papers: Hybrid Controller for Wind Turbine Generators to E…
Inadequate frequency response can arise due to a high penetration of wind turbine generators (WTGs) and requires a frequency support function to be integrated in the WTG. The appropriate design for these controllers to ensure adequate…
Converter-interfaced power sources (CIPSs), like wind turbine and energy storage, can be switched to the inertia emulation mode when the detected frequency deviation exceeds a pre-designed threshold, i.e. dead band, to support the frequency…
Wind generation is expected to reach substantially higher levels of penetration in the near future. With the converter interface, the rotor inertia of doubly-fed induction generator (DFIG) based wind turbine generator is effectively…
This paper proposes a novel coordinating mechanism between synchronous generators (SGs) and wind turbines (WTs) based on doubly-fed induction generators (DFIGs) for enhanced primary frequency regulation. WTs are urged to participate on…
Additional active power control (AAPC) of wind turbines (WTs) is essential to improve the transient frequency stability of low-inertia power systems. Most of the existing research has focused on imitating the frequency response of the…
The undergoing transition from conventional to converter-interfaced renewable generation leads to significant challenges in maintaining frequency stability due to declining system inertia. In this paper, a novel control framework for…
The electrical grid is evolving from a network consisting of mostly synchronous machines to a mixture of synchronous machines and inverter-based resources such as wind, solar, and energy storage. This transformation has led to a decrease in…
The absolute requirement to increase the amount of energy generation from renewable sources e.g. predominantly asynchronously connected wind turbines and photovoltaic installations, may in practice during transient events (where frequency…
In this paper, we present a controller synthesis approach for wind turbine generators (WTG) and energy storage systems with metric temporal logic (MTL) specifications, with provable probabilistic guarantees in the stochastic environment of…
This paper addresses the problem of controlling a variable-speed wind turbine with a Doubly Fed Induction Generator (DFIG), modeled as an electromechanically-coupled nonlinear system with rotor voltages and blade pitch angle as its inputs,…
Wind energy conversion system (WECS) is stochastic in nature and has low inertia to grid voltage instability, poor reactive power compensation and most importantly fault susceptibility. Variable speed WECS such as a doubly-fed induction…
Virtual inertia controllers (VICs) for wind turbine generators (WTGs) have been recently developed to compensate for the reduction of inertia in power systems. However, VICs can induce low-frequency torsional oscillations of the drive train…
This study examines the transient stability of low-inertia power systems with inverter-based generation (IBG) and proposes a sufficient stability criterion. In low-inertia grids, transient interactions are induced between the…
This paper proposes a capacitor voltage synchronizing control (CVSC) system for the regulation of full-scale wind power generator-supplied power systems (FWPS). The capacitor combined with the inverter of a full-scale wind power generator…
Nowadays, power system inertia is changing as a consequence of replacing conventional units by renewable energy sources, mainly wind and PV power plants. This fact affects significantly the grid frequency response under power imbalances. As…
This letter proposes a new control strategy for wind turbine generators to decide the necessity of switches between the normal operation and frequency support modes. The idea is to accurately predict an unsafe frequency response using a…
The increasing integration of renewable energy resources into power grids has led to time-varying system inertia and consequent degradation in frequency dynamics. A promising solution to alleviate performance degradation is using power…
Motivated by the increasing concerns over environmental challenges such as global warming and the exhaustion of fossil-fuel reserves, the renewable energy industry has become the most demanded electrical energy production source worldwide.…
High penetration of wind power with conventional grid following controls for inverter-based wind turbine generators (WTGs) weakens the power grid, challenging the power system stability. Grid-forming (GFM) controls are emerging technologies…
Harmonic pollution may damage the electric devices in wind power plants (WPPs), and propagate to the external grid. This paper proposes a harmonic mitigation scheme by embedding harmonic control functions in wind turbines (WTs) to manage…