Related papers: Multilateration of the Local Position Measurement
We propose a novel external indoor positioning system that computes the position and orientation of multiple model-scale vehicles. For this purpose, we use a camera mounted at a height of 3.3m and LEDs attached to each vehicle. We reach an…
Positioning is becoming a key component in many Internet of Things (IoT) applications. The main challenges and limitations are the narrow bandwidth, low power and low cost which reduces the accuracy of the time of arrival (TOA) estimation.…
A new 3D localization and mapping techinque with terrain inclination assistance is proposed in this paper to allow a robot to identify its location and build a global map in an outdoor environment. The Iterative Closest Points (ICP)…
We investigate localization of a source based on angle of arrival (AoA) measurements made at a geographically dispersed network of cooperating receivers. The goal is to efficiently compute accurate estimates despite outliers in the AoA…
Integrated satellite-terrestrial communications networks aim to exploit both the satellite and the ground mobile communications, thus providing genuine ubiquitous coverage. For 5G integrated low earth orbit (LEO) satellite communication…
This paper studies 3-D distributed network localization using mixed types of local relative measurements. Each node holds a local coordinate frame without a common orientation and can only measure one type of information (relative position,…
In this paper, we focus on the localization of a passive source from time difference of arrival (TDOA) measurements. TDOA values are computed with respect to pairs of fixed sensors that are required to be accurately time-synchronized. This…
The accurate geo-localization of mobile devices based upon received signal strength (RSS) in an urban area is hindered by obstacles in the signal propagation path. Current localization methods have their own advantages and drawbacks.…
This paper presents LAPA (Look Around and Pay Attention), a novel end-to-end transformer-based architecture for multi-camera point tracking that integrates appearance-based matching with geometric constraints. Traditional pipelines decouple…
The nature of pre-determined and on-demand mobile network fabrics can be exploited for real time Position Location and Tracking (PL&T) of radios and sensors (nodes) for Global Positioning System (GPS) denied or GPS-free systems. This issue…
In recent years, prior maps have become a mainstream tool in autonomous navigation. However, commonly available prior maps are still tailored to control-and-decision tasks, and the use of these maps for localization remains largely…
Emerging wireless applications are requiring ever more accurate location-positioning from sensor measurements. In this paper, we develop sensor selection strategies for 3D wireless positioning based on time of arrival (TOA) and received…
In this article, we design a new time-of-arrival (TOA) system for simultaneous user device (UD) localization and synchronization with a periodic asymmetric ranging network, namely PARN. The PARN includes one primary anchor node (PAN)…
This paper studies the positioning problem based on two-way time-of-arrival (TW-TOA) measurements in asynchronous wireless sensor networks. Since the optimal estimator for this problem involves difficult nonconvex optimization, we propose…
Passive source localization is often performed using time difference of arrival (TDOA) measurements, frequency difference of arrival (FDOA) measurements, direction of arrival (DOA) measurements, or a combination of all of these. For a…
Despite the number of works published in recent years, vehicle localization remains an open, challenging problem. While map-based localization and SLAM algorithms are getting better and better, they remain a single point of failure in…
This paper attempts to answer a question: for a given traversal area, how to quantify the geometric impact of anchor placement on localization performance. We present a theoretical framework for quantifying the anchor placement impact. An…
BPM (Beam Position Measurement) system is one of the most important beam diagnostic instruments in accelerators. A fully digital BPM (DBPM) has been designed for SSRF (Shanghai Synchrotron Radiation Facility). As Analog-to-Digital Converter…
A key aspect of the precision of a mobile robots localization is the quality and aptness of the map it is using. A variety of mapping approaches are available that can be employed to create such maps with varying degrees of effort, hardware…
Accurate indoor localization has long been a challenging problem due to the presence of multipath. Joint direction-of-arrival (DOA) and time delay (TD) estimation is a promising technique for accurate indoor Localization in next generation…