Related papers: A 3D-printed alkali metal dispenser
We report a measurement of the dynamical polarizability of dysprosium atoms in their electronic ground state at the optical wavelength of 1064 nm, which is of particular interest for laser trapping experiments. Our method is based on…
A sputter deposition source for use in ultrahigh vacuum (UHV) is described and some properties of the source are analyzed. The operating principle is based on the design developed by Mayr et al. [Rev. Sci. Instrum. 84, 094103 (2013)], where…
We describe the design, characterization and application of a simple, highly collimated and compact atomic/molecular beam source. This source is based on a segmented capillary design, constructed using a syringe needle. Angular width…
Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively-pumped to ultra-high-vacuum (UHV) to…
This study presents a fabrication process for lithium-drifted silicon (Si(Li)) detectors that, compared to previous methods, allows for mass production at a higher yield, while providing a large sensitive area and low leakage currents at…
We report on laser-based ion acceleration using freely suspended liquid crystal film targets, formed with thicknesses varying from 100 $nm$ to 2 $\mu m$ for this experiment. Optimization of Target Normal Sheath Acceleration (TNSA) of…
This work reports the production and characterization of lithium-loaded liquid scintillator (LiLS) for the Precision Reactor Oscillation and Spectrum Experiment (PROSPECT). Fifty-nine 90 liter batches of LiLS (${}^6{\rm Li}$ mass fraction…
We leverage recent advances in 3D-printing technology to design and fabricate a micro-ion trap with a spatially distinct loading zone for more efficient loading of ions from effusive thermal ovens. The design reduces the Mathieu-$q$…
We investigate ablation experiments performed by laser-plasma-filament guided electrical discharges at high-voltages of up to 145 kV. The guiding was accomplished via fs-laser-generated plasma filaments across a gap of 201 mm of air onto…
The characterization of a liquid scintillator incorporating an aqueous solution of enriched lithium chloride to produce a scintillator with 0.40% Li-6 is presented, including the performance of the scintillator in terms of its optical…
Using a blue detuned laser shaped in a Laguerre-Gaussian donut mode we highly collimate the output of a two dimensional magneto-optical trap. The resulting atomic beam has a 1 mm diameter, its divergence is reduced from 40 down to 3 mrad…
Deep laser cooling of atoms, ions, and molecules facilitates the study of fundamental physics as well as applied research. In this work, we report on the narrow-line laser cooling of thulium atoms at the wavelength of $506.2\,\textrm{nm}$…
Rapid heating of small buried regions by laser generated fast electrons may be useful for applications such as XUV radiation sources or as drivers for shock experiments. In non-structured targets the heating profile possesses a global…
Emission of muonium ($\mu^+e^-$) atoms from a laser-processed aerogel surface into vacuum was studied for the first time. Laser ablation was used to create hole-like regions with diameter of about 270$~\mu$m in a triangular pattern with…
We report laser cooling and trapping of $^{224}$Ra$^+$ ions. This was realized via two-step photoionization loading of radium into an ion trap. A robust source for $^{224}$Ra atoms, which have a 3.6-day half-life, was realized with an…
We report on a narrow-linewidth cooling of $^{6}$Li atoms using the $2S_{1/2}\to 3P_{3/2}$ transition in the ultraviolet (UV) wavelength regime. By combining the traditional red magneto-optical trap (MOT) at 671 nm and the UV MOT at 323 nm,…
We report on the development of a fast neutron detector using a liquid scintillator doped with enriched Li-6. The lithium was introduced in the form of an aqueous LiCl micro-emulsion with a di-isopropylnaphthalene-based liquid scintillator.…
In order to better build the Neutral Beam Injector with Negative Ion Source (NNBI), the pre-research on key technologies has been carried out for the Comprehensive Research Facility for Fusion Technology (CRAFT). Cesium seeding into…
Momentum-resolved scattering experiments with laser-cooled atomic targets have been performed since almost two decades with MOTRIMS (Magneto-Optical Trap Recoil Ion Momentum Spectroscopy) setups. Compared to experiments with gas-jet…
Proof-of-principle experiments have demonstrated an electrostatic field evaporation based deuterium ion source for use in compact, high-output deuterium-tritium neutron generators. The ion source produces principally atomic deuterium and…