Related papers: Multifocal diffractive lens generating several fix…
Diffractive/refractive optics, such as Phase Fresnel Lenses (PFL's), offer the potential to achieve excellent imaging performance in the x-ray and gamma-ray photon regimes. In principle, the angular resolution obtained with these devices…
Objectives: To analyze the whole process involved in the production of a new bifocal Multizone Contact Lens (MCL) for presbyopia. Methods: The optical quality of a new MCL was evaluated by ray tracing software in a model eye with pupil…
This paper proposes a technique for designing flat lenses using Field Transformation (FT), as opposed to Ray Optics (RO) or Transformation Optics (TO). The lens design consists of 10 layers of graded index dielectric in the radial direction…
Recently, an achromatic metasurface was successfully demonstrated to deflect light of multiple wavelengths in the same direction and it was further applied to the design of planar lenses without chromatic aberrations [Science, 347,…
The new type of multilevel Fresnel zone plate, consisting of stacked layers with bi-level zone profile has been investigated. The conditions of layers acting as single multilevel Fresnel zone plate have been discussed by numerical…
Bessel beams are non-diffracting light structures, which can be produced with simple tabletop optical elements such as axicon lenses or ring spatial filters and coherent laser beams. One of their main characteristic is that Bessel beams…
Metasurfaces are ultra-thin optical elements composed of engineered sub-wavelength structures that enable precise control of light. Their inverse design - determining a geometry that yields a desired optical response - is challenging due to…
In optical devices like diffraction gratings and Fresnel lenses, light wavefront is engineered through the structuring of device surface morphology, within thicknesses comparable to the light wavelength. Fabrication of such diffractive…
We demonstrate new axisymmetric inverse-design techniques that can solve problems radically different from traditional lenses, including \emph{reconfigurable} lenses (that shift a multi-frequency focal spot in response to refractive-index…
In this paper we present an inverse-designed 3D-printed all-dielectric stretchable millimeter wave metalens with a tunable focal distance. Computational inverse-design method is used to design a flat metalens made of disconnected building…
This study presents a prospective concept of a mechanically reconfigurable Gradient Index (GRIN) lens for focusing and beamforming applications. The lens is formed by corrugated layers, each realizing a refractive index profile expressed in…
In this study, a procedure for designing a free-form lens for long-range LED illumination is presented. The geometrical form of the proposed lens is obtained by minimizing optical path lengths of the rays emitted from a point-like light…
Focused laser beams allow controlling mechanical motion of objects and can serve as a tool for assembling complex micro and nano structures in space. While in a vast majority of cases small particles experience attractive gradient forces…
This paper describes a simple method for fabricating a variable-focus lens by using PDMS (polydimethylsiloxane) and filling with liquid for the variable-focus lens. The lens diameter of 2-mm was designed in this experiment and expected to…
We present a novel method to estimate the multifractal spectrum of point distributions. The method incorporates two motivated criteria (barycentric pivot point selection and non-overlapping coverage) in order to reduce edge effects, improve…
We derive a formula for the light field of a monochromatic plane wave that is truncated and reflected by a spherical mirror. Our formula is valid even for deep mirrors, where the aperture radius approaches the radius of curvature. We apply…
Diffraction is a fundamental property of light propagation. Owing to this phenomenon,light diffracts out in all directions when it passes through a subwavelength slit.This imposes a fundamental limit on the transverse size of a light beam…
We provide an analytical formulation to model the propagation of elastic waves in a homogeneous half-space supporting an array of thin plates. The technique provides the displacement field obtained from the interaction between an incident…
Photon sieves are permeable diffractive optical elements generated by open apertures on a substrate. These elements are well suited for the monitoring of running fluids. Our analysis considers the fabrication constrains of the photon sieve…
Multiple light scattering hampers imaging objects in complex scattering media. Approaches used in real practices mainly aim to filter out multiple scattering obscuring the ballistic waves that travel straight through the scattering medium.…