Related papers: Quadrature compressive sampling SAR imaging
Quadrature sampling has been widely applied in coherent radar systems to extract in-phase and quadrature (I and Q) components in the received radar signal. However, the sampling is inefficient because the received signal contains only a…
An algorithm based on compressive sensing (CS) is proposed for synthetic aperture radar (SAR) imaging of moving targets. The received SAR echo is decomposed into the sum of basis sub-signals, which are generated by discretizing the target…
Quadrature compressive sampling (QuadCS) is a sub-Nyquist sampling scheme for acquiring in-phase and quadrature (I/Q) components in radar. In this scheme, the received intermediate frequency (IF) signals are expressed as a linear…
Conventional Synthetic Aperture Radar (SAR) systems are limited in their ability to satisfy the increasing requirement for improved spatial resolution and wider coverage. The demand for high resolution requires high sampling rates, while…
Quadrature compressive sampling (QuadCS) is a newly introduced sub-Nyquist sampling for acquiring inphase and quadrature (I/Q) components of radio-frequency signals. For applications to pulse-Doppler radars, the QuadCS outputs can be…
In recent years, compressed sensing (CS) has been applied in the field of synthetic aperture radar (SAR) imaging and shows great potential. The existing models are, however, based on application of the sensing matrix acquired by the exact…
Multilook processing is a widely used speckle reduction approach in synthetic aperture radar (SAR) imaging. Conventionally, it is achieved by incoherently summing of some independent low-resolution images formulated from overlapping…
Synthetic aperture radar (SAR) is a day or night any-weather imaging modality that is an important tool in remote sensing. Most existing SAR image formation methods result in a maximum a posteriori image which approximates the reflectivity…
Conventional synthetic aperture radar (SAR) imaging systems typically employ deterministic signal designs, which lack the capability to convey communication information and are thus not suitable for integrated sensing and communication…
This paper presents an adaptive and intelligent sparse model for digital image sampling and recovery. In the proposed sampler, we adaptively determine the number of required samples for retrieving image based on space-frequency-gradient…
This article is written to serve as an introduction and survey of imaging with synthetic aperture radar (SAR). The reader will benefit from having some familiarity with harmonic analysis, electromagnetic radiation, and inverse problems.…
Quantized compressive sensing (QCS) deals with the problem of coding compressive measurements of low-complexity signals with quantized, finite precision representations, i.e., a mandatory process involved in any practical sensing model.…
Compressed sensing Synthetic Aperture Radar (SAR) image formation, formulated as an inverse problem and solved with traditional iterative optimization methods can be very computationally expensive. We investigate the use of denoising…
We present a novel approach to implement compressive sensing in laser scanning microscopes (LSM), specifically in image scanning microscopy (ISM), using a single-photon avalanche diode (SPAD) array detector. Our method addresses two…
Deep learning has been used to image compressive sensing (CS) for enhanced reconstruction performance. However, most existing deep learning methods train different models for different subsampling ratios, which brings additional hardware…
Synthetic Aperture Radar (SAR) utilizes the movement of the radar antenna over a specific area of interest to achieve higher spatial resolution imaging. In this paper, we aim to investigate the realization of SAR imaging for a stationary…
Synthetic aperture radar (SAR) can measure the phase with antenna and microwave, which cannot be directly extended to visible light imaging due to phase lost. In this letter, we reported an active remote sensing with visible light via…
Rotating Synthetic Aperture Radar (ROSAR) can generate a 360$^\circ$ image of its surrounding environment using the collected data from a single moving track. Due to its non-linear track, the Back-Projection Algorithm (BPA) is commonly used…
Compressed Sensing (CS) is suitable for remote acquisition of hyperspectral images for earth observation, since it could exploit the strong spatial and spectral correlations, llowing to simplify the architecture of the onboard sensors.…
Traditional radar sensing typically involves matched filtering between the received signal and the shape of the transmitted pulse. Under the confinement of classic sampling theorem this requires that the received signals must first be…