Related papers: Applying Electric and Magnetic Field Bias in a 3D …
We report a technique for applying a dc bias in a 3d microwave cavity. This is achieved by isolating the two halves of the cavity with a dielectric and directly using them as dc electrodes. By embedding a variable capacitance diode in the…
We report a technique for applying a dc voltage or current bias to the center conductor of a high-quality factor superconducting microwave cavity without significantly disturbing selected cavity modes. This is accomplished by incorporating…
We report a technique that can noninvasively add multiple DC wires into a 3D superconducting microwave cavity for electronic devices that require DC electrical terminals. We studied the influence of our DC lines on the cavity performance…
We report on a technique for applying a DC bias in a 3D microwave cavity. We achieve this by isolating the two halves of the cavity with a dielectric and directly using them as DC electrodes. As a proof of concept, we embed a variable…
Three-dimensional (3D) superconducting microwave cavities with large mode volumes typically have high quality factors ($>10^6$). This is due to a reduced sensitivity to surface dielectric losses, which is the limiting source of dissipation…
We analyze microwave cavity perturbation methods, and show that the technique is an excellent, precision method to study the dynamic magnetic and dielectric response in the $GHz$ frequency range. Using superconducting cavities, we obtain…
We present a superconducting cavity-coupled double quantum dot (DQD) photodiode that achieves a maximum photon-to-electron conversion efficiency of 25% in the microwave domain. With a higher-quality-factor cavity and improved device design…
Frequency tunability of 3D microwave cavities opens up numerous possibilities for their use in hybrid quantum systems and related technologies. For many applications it is desirable to tune the resonance at cryogenic temperatures without…
We demonstrate how spontaneous emission in a cavity can be controlled by the application of a dc field. The method is specially suitable for Rydberg atoms. We present a simple argument for the control of emission.
We propose a superconducting diode device comprising a central superconducting film flanked by two wires carrying an applied DC bias, suitably chosen so as to generate different asymmetric field profiles. Through numerical simulations of…
We demonstrate a hybrid device architecture where the charge states in a double quantum dot (DQD) formed in a Si/SiGe heterostructure are read out using an on-chip superconducting microwave cavity. A quality factor Q = 5,400 is achieved by…
We present the design of a reflective stop-band filter based on quasi-lumped elements that can be utilized to introduce large dc and low-frequency voltage biases into a low-loss superconducting coplanar waveguide (CPW) cavity. Transmission…
We describe the design and characterization of superconducting coplanar waveguide cavities tailored to facilitate strong coupling between superconducting quantum circuits and single trapped Rydberg atoms. For initial superconductor-atom…
Superconducting microwave cavities have found applications in many areas including quantum computing, particle accelerators, and dark matter searches. Their extremely high quality factors translate to very narrow bandwidth, which makes them…
Hybrid quantum systems are highly promising platforms for addressing important challenges of quantum information science and quantum sensing. Their implementation, however, is technologically non-trivial, since each component typically has…
A method for determining the internal DC magnetic field inside a superconducting cavity is presented. The method relies on the relationship between magnetic field and frequency of the Kittel mode of a ferrimagnetic sphere, hybridised in the…
On-chip micro-cavities with embedded quantum emitters provide an excellent platform for high-performance quantum technologies. A major difficulty for such devices is overcoming the detrimental effects of fluctuations in the device…
In the context of engineered quantum systems, there is a demand for superconducting tunable devices able to operate with high Q-factors at power levels equivalent to only a few photons. In this work, we developed a 3D microwave reentrant…
Semiconductor-based superconducting qubits offer a versatile platform for studying hybrid quantum devices in circuit quantum electrodynamics (cQED) architecture. Most of these cQED experiments utilize coplanar waveguides, where the…
A wide variety of applications of microwave cavities, such as measurement and control of superconducting qubits, magnonic resonators, and phase noise filters, would be well served by having a highly tunable microwave resonance. Often this…