Related papers: Studying Pulsed Laser Deposition conditions for Ni…
Pulsed Laser Deposition allows to obtain W and W-Ta alloy coatings with different nanostructures, monitored by X-ray diffraction. The correlation between such structures and the elastic properties is investigated for amorphous-like,…
Pulsed Laser Deposition in molecular-beam epitaxy environment (Laser-MBE) has been used to grow high quality BaCuOx/CaCuO2 superlattices. In situ Reflection High Energy Electron Diffraction (RHEED) shows that the growth mechanism is…
Physical vapor deposition of Si onto transferred graphene is investigated. At elevated temperatures, Si nucleates preferably on wrinkles and multilayer graphene islands. In some cases, however, Si can be quasi-selectively grown only on the…
Dense positrons are shown to be effectively generated from laser-solid interactions in the strong-field quantum electrodynamics (QED) regime. Whether these positrons are polarized has not yet been reported, limiting their potential…
In the present work we study the growth by pulsed laser deposition of YBa$_2$Cu$_3$O$_{7-\delta}$ (YBCO) films on the r-cut sapphire substrates. To improve the matching of the lattice parameters between the substrate and the film we use…
A special shaping of YAG:Nd^{3+} laser beam profile has been found to improve homogeneity and T_c of YBa_2Cu_3O_{7-\delta} films being deposited by the pulsed laser. Targets of a considerably non-stoichiometric composition and substrates of…
Homogeneous highly epitaxial LaSrMnO3 (LSMO) thin films have been grown on Yttria-stabilized-Zirconia (YsZ) / CeO2 buffer layers on technological relevant 4" silicon wafers using a Twente Solid State Technology B.V. (TSST) developed large…
Recently, nanolaminated ternary carbides have attracted immense interest due to the concomitant presence of both ceramic and metallic properties. Here, we grow nanolaminate Ti3AlC2 thin films by pulsed laser deposition on c-axis-oriented…
Growth of MgB2 thin films by pulsed laser deposition is examined under ex situ and in situ processing conditions. For the ex situ process, Boron films grown by PLD were annealed at 900 C with excess Mg. For the in situ process, different…
The nucleation and growth of CdS nanoparticles within a polymer matrix was followed by in-situ synchrotron X-ray diffraction. The nanoparticles form by effect of the thermolysis of thiolate precursors at temperatures between 200 and 300…
The ordering of a multilayer consisting of DSPC bilayers on a silica sol substrate is studied within the model-independent approach to the reconstruction of profiles of the electron density from X-ray reflectometry data. It is found that…
Control of thin film stoichiometry is of primary relevance to achieve desired functionality. Pulsed laser deposition ablating from binary-oxide targets (sequential deposition) can be applied to precisely control the film composition,…
High-quality Al0.37In0.63N layers have been grown by reactive radio-frequency (RF) sputtering on sapphire, glass and Si (111) at low substrate temperature (from room temperature to 300{\deg}C). Their structural, chemical and optical…
We report on picosecond UV-laser processing of hexagonal boron nitride (hBN) at moderately high pressures above 500 bar. The main effect is specific to the ambient gas and laser pulse duration in the ablation regime: when samples are…
To visualize the topography of thin oxide films during growth, thereby enabling to study its growth behavior quasi real-time, we have designed and integrated an atomic force microscope (AFM) in a pulsed laser deposition (PLD) vacuum setup.…
We present results on growth of large area epitaxial ReS2 thin film both on c plane sapphire substrate and MoS2 template by pulsed laser deposition (PLD). Films tend to grow with (0001) ReS2 perpendicular to (0001) Al2O3 and (0001) ReS2…
Superconducting thin films of MgB2 were deposited by Pulsed Laser Deposition on magnesium oxide and sapphire substrates. Samples grown at 450C in an argon buffer pressure of about 10-2 mbar by using a magnesium enriched target resulted to…
Nanocomposite NiO:Au thin films, formed by gold nanoparticles embedded in a nickel oxide matrix, have been grown by reactive pulsed laser deposition (R-PLD). Two actively synchronized nanosecond laser sources, a KrF excimer laser (248 nm)…
Multi-pulse femtosecond laser irradiation of a monolayer of polystyrene microspheres deposited on a polystyrene substrate leads to the formation of carbon nanomaterial exhibiting broadband excitation-dependent luminescence both within the…
We discuss the origin of the temperature dependence of resistivity observed in highly oriented LaNiO_3 thin films (of thickness d) grown on SrTiO_3 substrate by a pulsed laser deposition technique. All the experimental data are found to…