Related papers: Dynamic contact angle hysteresis in liquid bridges
Contact angle hysteresis and generation of dynamics angle are two fundamental phenomena about the contact angle deviation from the equilibrium state. Roughness on the solid surface, disjoining pressure in the thin film, and liquid-solid…
We investigate two-dimensional liquid bridges trapped between pairs of identical horizontal cylinders. The cylinders support forces due to surface tension and hydrostatic pressure which balance the weight of the liquid. The shape of the…
Dynamic wetting plays an important role in the physics of multiphase flow, and has significant influence on many industrial and geotechnical applications. In this work, a modified smoothed particle hydrodynamics (SPH) model is employed to…
Low voltage electrowetting on dielectrics on substrates with thin layer of lubricating fluid to reduce contact angle hysteresis is reported here. On smooth and homogeneous solid surfaces, it is extremely difficult to reduce contact angle…
We examine the dynamics of two coalescing liquid drops in the `inertial regime', where the effects of viscosity are negligible and the propagation of the bridge front connecting the drops can be considered as `local'. The solution fully…
We consider the equilibrium behaviour and dynamics of liquid drops on a superhydrophobic surface patterned with sawtooth ridges or posts. Due to the anisotropic geometry of the surface patterning, the contact line can preferentially depin…
We study the dynamics of the interface between two immiscible fluids in contact with a chemically homogeneous moving solid plate. We consider the generic case of two fluids with any viscosity ratio and of a plate moving in either directions…
Lubricated textured surfaces immersed in liquid flows offer tremendous potential for reducing fluid drag, enhancing heat and mass transfer, and preventing fouling. According to current design rules, the lubricant must chemically match the…
We present systematic wetting experiments and numerical simulations of gravity driven liquid drops sliding on a plane substrate decorated with a linear chemical step. Surprisingly, the optimal direction to observe crossing is not the one…
We experimentally observed the enhanced contact angle hysteresis (CAH) of dilute aqueous salt solution on graphite surface, i.e., 40.6$^\circ$, 34.6$^\circ$, and 27.8$^\circ$, for LiCl, NaCl, and KCl, indicating the effective tuning of the…
Electrowetting (EW) of water drops in ambient oil has found a wide range of applications including lab-on-a-chip devices, display screens, and variable focus lenses. The efficacy of all these applications is dependent on the contact angle…
The understanding of the spreading of liquids on solid surfaces is an important challenge for contemporary physics. Today, the motion of the contact line formed at the intersection of two immiscible fluids and a solid is still subject to…
The phenomena of liquid bridge formation due to an applied electric field is investigated. A new solution for the charged catenary is presented which allows to determine the static and dynamical stability conditions where charged liquid…
We numerically study two-component capillary bridges formed when a liquid droplet is placed in between two liquid infused surfaces (LIS). In contrast to commonly studied one-component capillary bridges on non-infused solid surfaces,…
In order to probe the dynamics of contact-line motion, we study the macroscopic properties of sessile drops deposited on and then aspirated from carefully prepared horizontal surfaces. By measuring the contact angle and drop width…
The contact angle between a gas-liquid interface and a solid surface is a function of the dynamic conditions of the contact line. Classic steady correlations link the contact angle to the contact line velocity. However, it is not clear…
It is common to relate the dynamic contact angle $\theta_d$ to the relative speed between the substrate and the contact line; theory suggests $\theta_d^3 \propto U$. In fact, available physical models show that the dynamic angle involves…
A vertical connection of water is formed when a high voltage electrode is dipped in and pulled out of a container of deionized water. We considered the formation and dynamical characteristics of this vertical water bridge. For the first…
The present article highlights an approach to generate contrasting patterns from drying droplets in a liquid bridge configuration, different from well-known coffee rings. Reduction of the confinement distance (the gap between the solid…
I study how the contact area and the work of adhesion, between two elastic solids with randomly rough surfaces, depend on the relative humidity. The surfaces are assumed to be hydrophilic, and capillary bridges form at the interface between…