Related papers: Selective etching of PDMS: etching as positive res…
In this work authors present for the first time how to apply the additive-free, cured PDMS as a negative tone resist material, demonstrate the creation of PDMS microstructures and test the solvent resistivity of the created microstructures.…
In this work we present some results of the treatment of polydimethylsiloxane (PDMS) surfaces using pulsed dielectric barrier discharge plasmas. The results of plasma treatment using different gases and mixtures, argon, argon plus water…
Accuracy in the measurement of mechanical properties is essential for precision engineering and for the interrogation of composition-property relationships. Conventional methods of mechanical testing, such as uniaxial tension, compression,…
Flexible microfluidics have found extensive utility in the biological and biomedical fields. A leading substrate material for compliant devices is polydimethylsiloxane (PDMS). Despite its many advantages, PDMS is inherently hydrophobic and…
Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 ohm.cm and 0.02 ohm.cm) in hydrofluoric (HF) acid of 24.5 precent…
Modification of surfaces to enable dropwise condensation is a promising approach for achieving high condensation rates. In this work, we present an experimental study on condensation of water on copper surfaces coated with an ultrathin, 5…
Porous silicon layers (PS) have been prepared in this work via Photoelectrochemical etching process (PEC) of n type silicon wafer of 0.8 ohm.cm resistivity in hydrofluoric (HF) acid of 24.5 precent concentration at different etching times…
Silicone is frequently used as a model system to investigate and tune wetting on soft materials. Silicone is biocompatible and shows excellent thermal, chemical, and UV stability. Moreover, the mechanical properties of the surface can be…
We report the development of magnetic nanocomposite sheets with superhydrophobic and superoleophilic surfaces generated by laser ablation. Polydimethylsiloxane elastomer freestanding films, loaded homogeneously with 2% wt. carbon coated…
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…
The polymer nanocomposites find applications in diverse areas ranging from smart materials to bioengineering. They are developed by dispersion of nanomaterials in a bulk phase of a polymeric material. Although several methods facilitate…
Heat exchangers are made of metals because of their high heat conductivity and mechanical stability. Metal surfaces are inherently hydrophilic, leading to inefficient filmwise condensation. It is still a challenge to coat these metal…
This paper deals with the preparation and characterization of conductive and flexible sheets based on graphite nanoplates (GNP) and polydimethylsiloxane (PDMS). Highly porous GNP nanopaper were prepared by filtration from a GNP suspension…
Recently-demonstrated high-quality three-dimensional (3D) subsurface laser processing inside crystalline silicon (c-Si) wafers opens a door to a wide range of novel applications in multidisciplinary research areas. Using this technique, a…
We report a simple technique for the selective etching of bilayer and monolayer MoS$_2$. In this work, chosen regions of MoS$_2$ were activated for oxygen adsorption and reaction by the application of low doses of He$^+$ at 30 keV in a gas…
We present an inductively coupled-plasma reactive-ion etching process that simultaneously provides both a high etch rate and unprecedented selectivity for gallium phosphide (GaP) in the presence of aluminum gallium phosphide…
Having a material that is matched in acoustic impedance with the surrounding medium is a considerable asset for many underwater acoustic applications. In this work, impedance matching is achieved by dispersing small, deeply subwavelength…
Robotic stacking of van der Waals heterostructures has been at the verge thanks to the convergence between artificial intelligence (AI) and two-dimensional (2D) materials research. Key ingredients to fulfill this pursuit often include…
Adhesion control at the interface of two surfaces is crucial in various applications, including the design of micro- and nanodevices such as microfluidic devices, triboelectric nanogenerators, biochips, and electronic sensors. Several…
III-Nitride micropillar structures show great promise for applications in micro light-emitting diodes and vertical power transistors due to their excellent scalability and outstanding electrical properties. Typically, III-Nitride…