Related papers: Methods to induce perpendicular magnetic anisotrop…
The authors demonstrated that L21-ordered full-Heusler Co2FeSi (CFS) alloy film with thickness of 100 nm were formed by facing targets sputtering (FTS) method at a substrate temperature TS = 300 deg C. Degrees of L21- and B2- order for the…
We report perpendicular magnetic anisotropy (PMA) in the half-metallic ferromagnetic Heusler alloy Co$_2$Fe$_{0.4}$Mn$_{0.6}$Si (CFMS) in a MgO/CFMS/Pd trilayer stack. PMA is found for CFMS thicknesses between 1 and 2 nm, with a magnetic…
Perpendicular magnetic anisotropy (PMA) in ultrathin magnetic structures is a key ingredient for the development of electrically controlled spintronic devices. Due to their relatively large spin-polarization, high Curie temperature and low…
We report on perpendicular magnetic anisotropy (PMA) in a Pt/Co2FeAl/MgO sandwiched structure with a thick Co2FeAl layer of 2-2.5 nm. The PMA is thermally stable that the anisotropy energy density Ku is 1.3{\times}106 erg/cm3 for the…
We report on the perpendicular magnetic anisotropy (PMA) behavior of heavy metal (HM)/ Fe alloy/MgO thin film heterostructures after an ultrathin HfO2 passivation layer is inserted between the Fe alloy and the MgO. This is accomplished by…
Fabrication of perpendicularly magnetized ferromagnetic films on various buffer layers, especially on numerous newly discovered spin-orbit torque (SOT) materials to construct energy-efficient spin-orbitronic devices, is a long-standing…
In this study, we achieved the improvement of uniaxial perpendicular magnetic anisotropy (PMA) in the W/MgAl2O4/CoFeMnSi/W/CoFeMnSi/MgAl2O4/W heterostructure by manipulating the annealing temperature (TA) [350 C, 450 C, and 550 C]. We…
Using first-principles calculations, we elucidate microscopic mechanisms of perpendicular magnetic anisotropy (PMA)in Fe/MgO magnetic tunnel junctions through evaluation of orbital and layer resolved contributions into the total anisotropy…
Magnetic tunnel junctions with perpendicular anisotropy form the basis of the spin-transfer torque magnetic random-access memory (STT-MRAM), which is non-volatile, fast, dense, and has quasi-infinite write endurance and low power…
We studied polycrystalline B2-type Co2FeAl (CFA) full-Heusler alloy based magnetic tunnel junctions (MTJs) fabricated on a Si/SiO2 amorphous substrate. Polycrystalline CFA films with a (001) orientation, a high B2 ordering, and a flat…
Perpendicular magnetization is essential for high-density memory application using magnetic materials. High-spin polarization of conduction electrons is also required for realizing large electric signals from spin-dependent transport…
Spin-transfer-torque magnetic random access memory (STT-MRAM) attracts extensive attentions due to its non-volatility, high density and low power consumption. The core device in STT-MRAM is CoFeB/MgO-based magnetic tunnel junction (MTJ),…
Magnetic tunnel junction (MTJ) based on CoFeB/MgO/CoFeB structures is of great interest due to its application in the spin-transfer-torque magnetic random access memory (STT-MRAM). Large interfacial perpendicular magnetic anisotropy (PMA)…
Epitaxial growth of Co20Fe50Ge30 thin film on single crystal MgO (001) substrate is reported. Structure characterization revealed (001)-oriented B2 order of CoFeGe well lattice matched with the MgO barrier. Perpendicular magnetic anisotropy…
Perpendicular magnetic anisotropy (PMA) is a key property of magnetoresistive random access memory (MRAM). To increase areal density of MRAM it is important to find a way to enhance the PMA. Recently a strong enhancement of the PMA by…
Perpendicularly magnetized spin injector with high Curie temperature is a prerequisite for developing spin optoelectronic devices on 2D materials working at room temperature (RT) with zero applied magnetic field. Here, we report the growth…
We present a theoretical study on interfacial magnetocrystalline anisotropy for Fe/MgAl$_2$O$_4$. This system has a very small lattice mismatch at the interface and therefore is suitable for realizing a fully coherent ferromagnet/oxide…
A combination of theoretical modelling and experiments reveals the origin of the large perpendicular magnetic anisotropy (PMA) that appears in nanometer-thick epitaxial Co films intercalated between graphene (Gr) and a heavy metal (HM)…
Perpendicular magnetic anisotropy (PMA) plays an important role in different spintronic devices. The rapid development of spintronics requires a better understanding of the nature and mechanisms of the PMA formation. In our article, we…
Perpendicular magnetic anisotropy (PMA) and dynamic magnetization reversal process in [CoFeB $t$ nm/Pd 1.0 nm]$_n$ ($t$ = 0.4, 0.6, 0.8, 1.0, and 1.2 nm; $n$ = 2 - 20) multilayer films have been studied by means of magnetic hysteresis and…