Related papers: Micromechanical microphone using sideband modulati…
We describe and demonstrate a method by which the nonlinear piezoelectric properties of a piezoelectric material may be measured by detecting the force that it applies on a suspended micromechanical resonator at one of its mechanical…
The accuracy of microwave measurements is not only critical for applications in telecommunication and radar, but also for future quantum computers. Qubit technologies such as superconducting qubits or spin qubits require detecting minuscule…
We investigate the sideband spectra of a driven nonlinear mode with its eigenfrequency being modulated at a low frequency (< 1 kHz). This additional parametric modulation leads to prominent antiresonance lineshapes in the sideband spectra,…
The measurement of micron-sized mechanical resonators by electrical techniques is difficult, because of the combination of a high frequency and a small mechanical displacement which together suppress the electromechanical coupling. The only…
In this work, we report optomechanical coupling, resolved sidebands and phonon lasing in a solid-core microbottle resonator fabricated on a single mode optical fiber. Mechanical modes with quality factors (Q_m) as high as 1.57*10^4 and…
We present measurements on nanomechanical resonators machined from Silicon-on-Insulator substrates. The resonators are designed as freely suspended Au/Si beams of lengths on the order of 1 - 4 um and a thickness of 200 nm. The beams are…
This work reports the procedure for modeling piezoelectric acoustic resonators and filters at millimeter wave (mmWave). Different from conventional methods for lower frequency piezoelectric devices, we include both acoustic and…
The addition of nonlinearity to an harmonic resonator provides a route to complex dynamical behaviour of resonant modes, including coupling between them. We present a superconducting device that makes use of the nonlinearity of Josephson…
The inherent coupling of optical and mechanical modes in high finesse optical microresonators provide a natural, highly sensitive transduction mechanism for micromechanical vibrations. Using homodyne and polarization spectroscopy…
Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave…
We report on the design and performance of a cryogenic (300 mK) near-field scanning microwave microscope. It uses a microwave resonator as the near-field sensor, operating at a frequency of 6 GHz and microwave probing amplitudes down to 100…
Piezoelectric microresonators are indispensable in wireless communications, and underpin radio frequency filtering in mobile phones. These devices are usually analyzed in the quasi-(electro)static regime with the magnetic field effectively…
If driven sufficiently strongly, superconducting microresonators exhibit nonlinear behavior including response bifurcation. This behavior can arise from a variety of physical mechanisms including heating effects, grain boundaries or weak…
Nanomechanical resonators having small mass, high resonance frequency and low damping rate are widely employed as mass detectors. We study the performances of such a detector when the resonator is driven into a region of nonlinear…
Acoustic waves have emerged as versatile on-chip information carriers with applications ranging from microwave filters to transducers. Nonreciprocal devices are desirable for the control and routing of high-frequency phonons. This is…
The resonance frequency of an optical whispering gallery mode (WGM) microcavity is extremely important in its various applications. Many efforts have been made to fine tune this parameter. Here, we report the design and implementation of a…
Opto-mechanical systems have enabled wide-band optical frequency conversion and multi-channel all-optical radio frequency amplification. Realization of an on-chip silicon communication platform is limited by photodetectors needed to convert…
Absorbing airborne noise at frequencies below 300 Hz is a particularly vexing problem due to the absence of natural sound absorbing materials at these frequencies. The prevailing solution for low-frequency sound absorption is the use of…
We present a Michelson-type microwave interferometer for use in ferromagnetic resonance experiments. The interferometer is capable of broadband operation without manual adjustment of phase delay or amplitude attenuation. A prototype of the…
It is often required to extract the sound of an objective instrument played in concert with other instruments. Microphone array is one of the effective ways to enhance a sound from a specific direction. However it is not effective in an…