Related papers: Beam Switching Techniques for Millimeter Wave Vehi…
Millimeter-wave (mmwave) communication represents a potential solution to capacity shortage in vehicular networks. However, effective beam alignment between senders and receivers requires accurate knowledge of the vehicles' position for…
Recently millimeter-wave bands have been postulated as a means to accommodate the foreseen extreme bandwidth demands in vehicular communications, which result from the dissemination of sensory data to nearby vehicles for enhanced…
Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time. The highly directional nature of wireless links in millimeter spectral bands will require…
As driving becomes more automated, vehicles are being equipped with more sensors generating even higher data rates. Radars (RAdio Detection and Ranging) are used for object detection, visual cameras as virtual mirrors, and LIDARs (LIght…
Millimeter wave (mmWave) technologies will support the high bandwidth and data rate requirements of V2X services demanded by connected and automated vehicles (CAVs). MmWave V2X technologies will leverage directional antennas that challenge…
We investigate sensing-assisted predictive beamforming schemes for vehicle-to-infrastructure (V2I) communication by exploiting the integrated sensing and communication (ISAC) functionalities at the roadside unit (RSU). The RSU deploys a…
Millimeter-wave (mm-wave) communications incur a high beam alignment cost in mobile scenarios such as vehicular networks. Therefore, an efficient beam alignment mechanism is required to mitigate the resulting overhead. In this paper, a…
5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization…
For high-speed train (HST) millimeter wave (mmWave) communications, the use of narrow beams with small beam coverage needs frequent beam switching, while wider beams with small beam gain leads to weaker mmWave signal strength. In this…
Intelligent Transportation Systems (ITSs) require ultra-low end-to-end delays and multi-gigabit-per-second data transmission. Millimetre Waves (mmWaves) communications can fulfil these requirements. However, the increased mobility of…
Millimeter wave (mmWave) has great potential in realizing high data rate thanks to the large spectral channels. It is considered as a key technology for the fifth generation wireless networks and is already used in wireless LAN (e.g., IEEE…
In order to cope with the severe path loss, millimeter-wave (mm-wave) systems exploit highly directional communication. As a consequence, even a slight beam misalignment between two communicating devices (for example, due to mobility) can…
The next generations of vehicles will require data transmission rates in the order of terabytes per driving hour, to support advanced automotive services. This unprecedented amount of data to be exchanged goes beyond the capabilities of…
Exploiting the millimeter wave (mmWave) band has recently attracted considerable attention as a potential solution to widespread deployment of device-to-device (D2D) communication challenges, namely, spectrum scarcity and interference.…
Connected and autonomous vehicles will play a pivotal role in future Intelligent Transportation Systems (ITSs) and smart cities, in general. High-speed and low-latency wireless communication links will allow municipalities to warn vehicles…
Recently, the millimeter wave (mmWave) band has been investigated as a means to support the foreseen extreme data rate demands of emerging automotive applications, which go beyond the capabilities of existing technologies for vehicular…
Millimeter-wave (mmWave) systems use directional beams to support high-rate data communications. Small misalignment between the transmit and receive beams (e.g., due to the mobility) can result in significant drop of the received signal…
Beamforming techniques are considered as essential parts to compensate the severe path loss in millimeter-wave (mmWave) communications by adopting large antenna arrays and formulating narrow beams to obtain satisfactory received powers.…
Utilizing radar sensing for assisting communication has attracted increasing interest thanks to its potential in dynamic environments. A particularly interesting problem for this approach appears in the vehicle-to-vehicle (V2V) millimeter…
Millimeter wave (mmWave) communication has attracted increasing attention as a promising technology for 5G networks. One of the key architectural features of mmWave is the use of massive antenna arrays at both the transmitter and the…