Related papers: Numerical investigation of supersonic shock-wave/b…
The present numerical investigation uses well-resolved large-eddy simulations to study the low-frequency unsteady motions observed in shock-wave/turbulent-boundary-layer interactions. Details about the numerical aspects of the simulations…
The physics of shock-boundary layer interactions (SBLIs) in a supersonic turbine cascade at Mach 2.0 and Reynolds number 395,000, based on the axial chord, is investigated through a wall-resolved large eddy simulation. Special attention is…
Shock-boundary layer interactions (SBLI) on hypersonic cone step flows exhibit a range of intrinsic unsteady behaviors, from shear-layer oscillations to large-scale pulsations. This work investigates the unsteadiness in a cone-step geometry…
The effects of adiabatic and isothermal boundary conditions are investigated on the shock-boundary layer interactions (SBLIs) in a supersonic turbine cascade. Special attention is given to the characterization of the incoming boundary…
The dynamics of a shock wave impinging on a transitional high-enthalpy boundary layer out of thermochemical equilibrium is investigated for the first time by means of a direct numerical simulation. The freestream Mach number is equal to 9…
Boundary layers of adiabatic and isothermal curved walls are investigated for a supersonic turbine cascade, including the effects of shock-boundary layer interactions (SBLIs). Wall-resolved large eddy simulations (LES) are performed for a…
Resolvent analysis is used to study the low-frequency behaviour of the laminar oblique shock wave / boundary layer interaction (SWBLI). It is shown that the computed optimal gain, which can be seen as a transfer function of the system,…
Wall-resolved large eddy simulations are employed to investigate the shock-boundary layer interactions (SBLIs) in a supersonic turbine cascade. An analysis of the suction side separation bubbles forming due to the SBLIs is presented for…
This work is a numerical study of a transitional shock wave boundary layer interaction (SWBLI). The main goal is to improve our understanding of the well known low-frequency SWBLI unsteadiness and especially the suspected role of triadic…
Numerical work on shockwave/boundary-layer interactions (SBLIs) to date has largely focused on span-periodic quasi-2D configurations that neglect the influence lateral confinement has on the core flow. The present study is concerned with…
We perform a combined numerical and experimental study to investigate the transonic shock-wave/turbulent-boundary-layer interactions (STBLI) in a shock-induced separated subscale planar nozzle with fully-expanded Mach number,$M_j = 1.05$…
The low-frequency unsteady motions behind a backward-facing step (BFS) in a turbulent flow at $Ma=1.7$ and $Re_\infty=1.3718\times 10^5$ is investigated using a well-resolved large-eddy simulation (LES). The instantaneous flow field…
Laminar-turbulent transition in shock wave-boundary-layer interactions (SWBLI) remains a major challenge for hypersonic vehicle design, with implications for drag, heat transfer, and structural loads. Linear optimal perturbation analyses…
The transitional boundary layer flow over a flat plate is investigated. The boundary layer flow is known to develop unstable Tollmien-Schlichting waves above a critical value of the Reynolds number. However, it is also known that this…
Direct numerical simulation of the Navier-Stokes equations is carried out to investigate the interaction of a conical shock wave with a turbulent boundary layer developing over a flat plate at free-stream Mach number $M_\infty = 2.05$ and…
Turbulence modeling has the potential to revolutionize high-speed vehicle design by serving as a co-equal partner to costly and challenging ground and flight testing. However, the fundamental assumptions that make turbulence modeling such…
The interaction between an incident shock wave and a Mach-6 undisturbed hypersonic laminar boundary layer over a cold wall is addressed using direct numerical simulations (DNS) and wall-modeled large-eddy simulations (WMLES) at different…
We investigate flow instability created by an oblique shock wave impinging on a Mach 5.92 laminar boundary layer at a transitional Reynolds number. The adverse pressure gradient of the oblique shock causes the boundary layer to separate…
The shock wave and boundary layer interaction (SWBLI) plays an important role in the design of hypersonic vehicles. However, discrepancies between the numerical results of high-temperature gas dynamics and experiment data have not been…
To investigate the wall-cooling effects on shock wave turbulent/boundary layer interaction (SWTBLI) with limited experimental data, a supersonic wind tunnel wall was cooled using liquid nitrogen as the cryogenic coolant. Under the condition…