Related papers: Rugged HBT Class-C Power Amplifiers with Base-Emit…
Robust simulation is essential for reliable operation and planning of transmission and distribution power grids. At present, disparate methods exist for steady-state analysis of the transmission (power flow) and distribution power grid…
Parametric amplification offers a route to overcoming intrinsic damping in spin-wave systems, a key challenge in the development of magnonic signal processing and computing technologies. Here we demonstrate the sustained amplification of…
We report the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use the superconducting nonlinear asymmetric inductive element (SNAIL) loops,…
The gain of silicon photomultipliers (SiPMs) increases with bias voltage and decreases with temperature. To operate SiPMs at stable gain, the bias voltage can be readjusted to compensate for temperature changes. We have tested this concept…
Interconnection and damping assignment, passivity-based control (IDA-PBC) has proven to be a successful control technique for the stabilisation of many nonlinear systems. In this paper, we propose a method to robustify a system which has…
Superconducting traveling-wave parametric amplifiers are a promising amplification technology suitable for applications in submillimeter astronomy. Their implementation relies on the use of Floquet transmission lines in order to create…
This paper presents a low-jitter hybrid voltage level shifter (HVLS) suitable for high-speed applications. The proposed architecture offers the advantage of cross-coupled feedback to simultaneously generate two voltage domain signals with…
In Josephson Traveling-Wave Parametric Amplifiers, higher-order harmonics of the pump tone and its sidebands are commonly present and typically regarded as parasitic. Consequently, most design efforts have focused on suppressing these…
We show that a continuously nonuniform coupled line C-section phaser, as the limiting case of the step discontinuous coupled-line multisection commensurate and non-commensurate phasers, provides enhanced bandwidth and diversity in real-time…
We study parametric amplification in nonlinear left-handed transmission lines, which serve as model systems for nonlinear negative index metamaterials. We experimentally demonstrate amplification of a weak pump signal in three regimes: with…
A new upper limit on the 21-cm signal power spectrum at a redshift of $z \approx 9.1$ is presented, based on 141 hours of data obtained with the Low-Frequency Array (LOFAR). The analysis includes significant improvements in…
Predicting the performance of traveling-wave parametric amplifiers (TWPAs) based on nonlinear elements like superconducting Josephson junctions (JJs) is vital for qubit read-out in quantum computers. The purpose of this article is twofold:…
This paper proposes a composite learning backstepping control (CLBC) strategy based on modular backstepping and high-order tuners to achieve closed-loop exponential stability without high-gain feedback and PE. A novel composite learning…
We employ a cryogenic High Electron Mobility Transistor (HEMT) amplifier to increase the bandwidth of a charge detection setup with a quantum point contact (QPC) charge sensor. The HEMT is operating at 1K and the circuit has a bandwidth of…
High-power single-frequency fiber amplifiers are increasingly dominant in technologies that require high optical power, stability, and coherence simultaneously. In this chapter, we first provide an overview of their key characteristics,…
A microwave rectifier at 5.8 GHz without any capacitors is presented, which owns a measured MW-to-DC conversion efficiency of 68.1%. A harmonic rejection filter and a DC pass filter, which replace lumped capacitors in conventional microwave…
Low-resolution analog-to-digital converters (ADCs) simplify the design of millimeter-wave (mmWave) massive multi-user multiple-input multiple-output (MU-MIMO) basestations, but increase vulnerability to jamming attacks. As a remedy, we…
A Capacitor-within-Capacitor (CWC) is a nested electronic element that has two components: the cell (e.g., the outer capacitor) and the gate (e.g., the inner capacitor). The designations for the gate and cell may be interchanged. Here, an…
In this paper, a two-stage ultra-low-power operational amplifier is designed, and a comparative analysis of the proposed subthreshold complementary amplifier is presented between 180nm, 90nm, and 45nm CMOS technology. The proposed…
A recently introduced Early modeling of transistors is applied to the study of the common collector amplifier (or emitter follower), an important type of electronic circuit typically employed as buffer, being characterized by near unit…