Related papers: Structural and Mossbauer studies of ball milled Co…
Precursor powders of BaMg2-xCoxFe16O27 with (x = 0.0, 1.0, and 2.0) were prepared using high-energy ball milling, and the effects of chemical composition and sintering temperature on the structural and magnetic properties were investigated…
We present X-ray diffraction (XRD), M\"ossbauer spectroscopy (MS) and d.c. magnetization measurements performed on ball-milled CuFe2O4 samples. The average particle size <d> was found to decrease to the nanometer range after t=15 min of…
The effect of heat treatment on the structural and micro-structural properties of the Co2-Y (Ba2Co2Fe12O22) was investigated by means of X-ray diffraction and the Rietveld refinement. The samples were synthesized using high-energy ball…
Noncollinear spin systems with magnetically induced ferroelectricity from changes in spiral magnetic ordering have attracted significant interest in recent research due to their remarkable magnetoelectric effects with promising…
Numerous applications of hexagonal ferrites are related to their easy axis or easy plane magnetocrystalline anisotropy configurations. Certain W-type ferrites undergo spin reorientation transitions (SRT) between different anisotropy states…
This work reports the formation of nano- crystalline Al50Cu28Fe22 by high-energy milling. For obtaining the nano-crystalline material, the Al50Cu28Fe22 alloy synthesized through slow cooling of the molten alloy was subjected to ball…
A series of nine samples of \sigma-Fe_{100-x}Mo_x with 44<x<57 were synthesized by a sintering method. The samples were investigated experimentally and theoretically. Using X-ray diffraction techniques structural parameters such as lattice…
The present study is concerned with the fabrication and characterization of Me2Y substituted hexaferrites, Ba2Me2Fe12-xTxO22 (Me = Co2+, Mg2+, and Cr2+, and T = Fe3+, and Ga3+). The samples were prepared by the conventional ball milling…
We report the magnetic properties of mechanically milled Co$_{0.2}$Zn$_{0.8}$Fe$_2$O$_4$ spinel oxide. After 24 hours milling of the bulk sample, the XRD spectra show nanostructure with average particle size $\approx$ 20 nm. The as milled…
Mechanical alloying (MA) has been used to fabricate the Co2FeAl Heusler alloy with a nanocrystalline structure. The formation mechanism of the alloy has been investigated. Rietveld analysis showed that all samples that were milled for more…
The synthesis of aluminum substituted strontium hexaferrite nanoparticles (SrFe12-xAlxO19 with x = 0-3), via three different preparation methods, is investigated. The synthesis methods are hydrothermal autoclave (AC) synthesis, a citrate…
Nanostructured Zinc oxide (ZnO) was synthesized via a ball milling for 10 hours using high energy planetary ball mill. Phase purity and homogeneity of all the samples have been investigated by X-ray diffraction (XRD) and Field Emission…
Vanadium substituted SrM hexaferrites (SrFe12-xVxO19 with x = 0.2, 0.4) and Eu-substituted BaM hexaferrite (Ba0.8Eu0.2Fe12O19) were prepared by high energy ball milling and sintering at 1200{\deg} C. X-ray diffraction measurements revealed…
The study of the magnetic properties depending upon mechanical milling of the ferromagnetic polycrystalline TbAl_2 material is reported. The Rietveld analysis of the X-ray diffraction data reveals a decrease of the grain size down to 14 nm…
Fe/Au nanoparticles have been chemically synthesized through a reverse micelle reaction and investigated by both conventional and synchrotron based x-ray diffraction and by magnetic and Moessbauer spectral studies. The powder x-ray…
The hexaferrites are known to exhibit a wide range of magnetic structures, some of which are connected to important technological applications and display magnetoelectric properties. We present data on the low field magnetic structures…
Nanocrystalline Al-doped nickel ferrite powders have been synthesized by sol-gel auto-ignition method and the effect of non-magnetic aluminum content on the structural and magnetic properties has been studied. The X-ray diffraction (XRD)…
Single-phase Mg-doped ZnFe$_2$O$_4$ nanoparticles with x= 0, 0.3, 0.5, 0.7 have been prepared by the glycol-thermal method without any subsequent calcination. The crystallite size, microstructure and magnetic properties of the prepared…
Magnesium diboride (MgB2) powder was mechanically alloyed by high energy ball milling with C to a composition of Mg(B0.95C0.05)2 and then sintered at 1000 C in a hot isostatic press. Milling times varied from 1 minute to 3000 minutes. Full…
A simple route to prepare Gd$_{0.7}$Sr$_{0.3}$MnO$_3$ nanoparticles by ultrasonication of their bulk powder materials is presented in this article. For comparison, Gd$_{0.7}$Sr$_{0.3}$MnO$_3$ nanoparticles are also prepared by ball milling.…