Related papers: Morphometric analysis of polygonal cracking patter…
The pattern development of multiple cracks in extremely anisotropic solids such as bilayer or multilayer two-dimensional (2D) crystals contains rich physics, which, however, remains largely unexplored. We studied crack interaction across…
Cohesive granular materials, like wet sand, retain their shape before yielding under stress. This solid-like behavior is associated with elasticity. As the loading increases, the material typically flows. However, cohesive materials can…
Stochastic models for pore collapse in granular materials are developed. First, a general fluctuating stress-strain relation for a plastic flow rule is derived. The fluctuations account for non-associativity in plastic deformations…
Solid polycrystalline materials undergoing diffusion creep are usually described by Cauchy continuum models with a Newtonian viscous rheology dependent on the grain size. Such a continuum lacks the rotational degrees of freedom needed to…
Hydrated granular packings often crack into discrete clusters of grains when dried. Despite its ubiquity, accurate prediction of cracking remains elusive. Here, we elucidate the previously overlooked role of individual grain shrinkage---a…
Unstable systems of fluidized grains in a very-narrow vertical tube can auto-defluidize after some time, the settling particles forming either a glass- or crystal-like structure. We carried out experiments using different polymer spheres,…
A phase field model of a crack front propagating in a three dimensional brittle material is used to study the fractographic patterns induced by the branching instability. The numerical results of this model give rise to crack surfaces that…
A study of crack patterns in laponite films of different thickness is presented. Two cracking regimes are observed. The earlier with a higher rate of desiccation and shrinking has predominantly four-fold vertices in the crack network, while…
Granular materials often present correlations between particle size and shape due to their geological formation and mechanisms of weathering and fragmentation. It is known that particle shape strongly affects shear strength. However, the…
Polycrystalline graphene has an inherent tendency to buckle, i.e. develop out-of-plane, three-dimensional structure. A force applied to stretch a piece of polycrystalline graphene influences the out-of-plane structure. Even if the graphene…
The drying of a colloidal dispersion can result in a gel phase defined as a porous matrix saturated in solvent. During the drying process, high mechanical stresses are generated. When these stresses exceed the strength of the material, they…
Upon mechanical loading, granular materials yield and undergo plastic deformation. The nature of plastic deformation is essential for the development of the macroscopic constitutive models and the understanding of shear band formation.…
We investigate the initiation of cracks in vertically freestanding water-saturated colloidal pillars constructed using a direct-write technique. Paradoxically, the cracks form during drying at the free end, far from the substrate, where the…
Thermodynamic dislocation theory incorporating dislocation impediment by the grain boundaries is developed to analyze the shear test of polycrystals. With a small set of physics based material parameters, we are able to simulate the…
In a granular material, a macroscopically homogeneous deformation does not correspond to a homogeneous displacement field when looking at the individual grains. The deviation of a grain displacement from the value dictated by the continuum…
Plastic deformation of micron-scale crystalline solids exhibits stress-strain curves with significant sample-to-sample variations. It is a pertinent question if this variability is purely random or to some extent predictable. Here we show,…
Predicting the growth of large cracks in brittle materials is a fundamental unresolved problem in fracture mechanics. Under out-of-plane shear loading, an initially planar crack may fragment into multiple cracks, forming an echelon crack…
A planar crack generically segments into an array of "daughter cracks" shaped as tilted facets when loaded with both a tensile stress normal to the crack plane (mode I) and a shear stress parallel to the crack front (mode III). We…
A qualitative behavior of grain size dependent resistance of polycrystalline films has been worked out by extending the earlier model (Volger's model) for polycrystalline films. Growth of grain size is considered to be accompanied with a…
The thermodynamic theory of dislocation/grain boundary interaction, including dislocation pile-up against, absorption by, and transfer through the grain boundary, is developed for nonuniform plastic deformations in polycrystals. The case…