Related papers: Switching Times in Fabry-Perot Measurements
We show that an escape from the potential minimum of Fabry-Perot interferometers can be detected measuring the associated sudden change of reflectivity. We demonstrate that the loss of information that occurs retaining only the sequence of…
A key issue in developing pendular Fabry-Perot interferometers as very accurate displacement measurement devices, is the noise level. The Fabry-Perot pendulums are the most promising device to detect gravitational waves, and therefore the…
The dynamics of Fabry-Perot cavity with suspended mirrors is described. The suspended mirrors are nonlinear oscillators interacting with each other through the laser circulating in the cavity. The degrees of freedom decouple in normal…
The mirror relative motion of a suspended Fabry-Perot cavity is studied in the frequency range 3-10 Hz. The experimental measurements presented in this paper, have been performed at the Low Frequency Facility, a high finesse optical cavity…
Optical Doppler shift demonstration experiments are not a simple task since the light source cannot usually be moved in a sufficiently smooth and uniform manner to keep the level of noise well below of that of the signal. For that reason…
The implementation of Fabry-Perot cavities in gravitational-wave detectors has been pivotal to improving their sensitivity, allowing the observation of an increasing number of cosmological events with higher signal-to-noise ratio. Notably,…
We investigated the opto-mechanical properties of a Fabry-Perot cavity with a mirror mounted on a spring. Such a structure allows the cavity length to change elastically under the effect of light induced forces. This opto-mechanical…
We report on measurements and modeling of the mode structure of tunable Fabry-P\'erot optical microcavities with imperfect mirrors. We find that non-spherical mirror shape and finite mirror size lead to loss, mode deformation, and shifted…
A high-finesse suspended mirror Fabry-Perot cavity is experimentally studied in a regime where radiation pressure and photothermal effect are both relevant. The competition between these phenomena, operating at different time scales,…
The measurement of extremely small displacements is of utmost importance, both for fundamental studies [1-4], and practical applications [5-7]. One way to estimate a small displacement is to measure the Doppler shift generated in light…
Simultaneously enhanced reflectance and transmittance greater than 35 dB are demonstrated for the lasing spaser (or spasing) behavior in an active fishnet metamaterial. In mimicking a lasing cavity, an equivalent active slab with Lorentz…
Increasing requirements in the sensitivity of interferometric measurements is a common feature of several research fields, from gravitational wave detection to quantum optics. This motivates refined studies of high reflectivity mirrors and…
The large scale interferometric gravitational wave detectors consist of Fabry-Perot cavities operating at very high powers ranging from tens of kW to MW for next generations. The high powers may result in several nonlinear effects which…
We have developed a technique to measure the absolute frequencies of optical transitions by using an evacuated Rb-stabilized ring-cavity resonator as a transfer cavity. We study possible wavelength-dependent errors due to dispersion at the…
We have built a microwave Fabry-Perot resonator made of diamond-machined copper mirrors coated with superconducting niobium. Its damping time (Tc = 130 ms at 51 GHz and 0.8 K) corresponds to a finesse of 4.6 x 109, the highest ever…
The ultrafast response of the prototype Mott-Hubbard system (V1-xCrx)2O3 was systematically studied with fs pump-probe reflectivity, allowing us to clearly identify the effects of the metal-insulator transition on the transient response.…
Long-storage-time Fabry-Perot cavities are a core component of many precision measurement experiments. Optical loss in such cavities is a critical parameter in determining their performance; however, it is very difficult to determine a…
We here present an investigation of the ringing effect observed on the VIRGO mode-cleaner prototype MC30. The results of a numerical calculation show how a simple empirical formula can determine the cavity expansion rate from the…
Dual Fabry-Perot cavity based optical refractometry (DFPC-OR) has a high potential for assessments of gas density. However, drifts of the FP cavity often limit its performance. We show that by the use of two narrow-linewidth fiber lasers…
Tunable open-access Fabry-P\'erot microcavities enable the combination of cavity enhancement with high resolution imaging. To assess the limits of this technique originating from background variations, we perform high-finesse scanning…